252.215-7002 Cost Estimating System Requirements.
As prescribed in 215.408(1), use the following clause:
COST ESTIMATING SYSTEM REQUIREMENTS (DEC 2012)
(a) Definitions.
“Acceptable estimating system” means an estimating system that complies with the system criteria in paragraph (d) of this clause, and provides for a system that—
(1) Is maintained, reliable, and consistently applied;
(2) Produces verifiable, supportable, documented, and timely cost estimates that are an acceptable basis for negotiation of fair and reasonable prices;
(3) Is consistent with and integrated with the Contractor’s related management systems; and
(4) Is subject to applicable financial control systems.
“Estimating system” means the Contractor's policies, procedures, and practices for budgeting and planning controls, and generating estimates of costs and other data included in proposals submitted to customers in the expectation of receiving contract awards. Estimating system includes the Contractor's—
(1) Organizational structure;
(2) Established lines of authority, duties, and responsibilities;
(3) Internal controls and managerial reviews;
(4) Flow of work, coordination, and communication; and
(5) Budgeting, planning, estimating methods, techniques, accumulation of historical costs, and other analyses used to generate cost estimates.
“Significant deficiency” means a shortcoming in the system that materially affects the ability of officials of the Department of Defense to rely upon data and information produced by the system that is needed for management purposes.
(b) General. The Contractor shall establish, maintain, and comply with an acceptable estimating system.
(c) Applicability. Paragraphs (d) and (e) of this clause apply if the Contractor is a large business and either—
(1) In its fiscal year preceding award of this contract, received Department of Defense (DoD) prime contracts or subcontracts, totaling $50 million or more for which certified cost or pricing data were required; or
(2) In its fiscal year preceding award of this contract—
(i) Received DoD prime contracts or subcontracts totaling $10 million or more (but less than $50 million) for which certified cost or pricing data were required; and
(ii) Was notified, in writing, by the Contracting Officer that paragraphs (d) and (e) of this clause apply.
(d) System requirements.
(1) The Contractor shall disclose its estimating system to the Administrative Contracting Officer (ACO), in writing. If the Contractor wishes the Government to protect the data and information as privileged or confidential, the Contractor must mark the documents with the appropriate legends before submission.
(2) An estimating system disclosure is acceptable when the Contractor has provided the ACO with documentation that—
(i) Accurately describes those policies, procedures, and practices that the Contractor currently uses in preparing cost proposals; and
(ii) Provides sufficient detail for the Government to reasonably make an informed judgment regarding the acceptability of the Contractor's estimating practices.
(3) The Contractor shall—
(i) Comply with its disclosed estimating system; and
(ii) Disclose significant changes to the cost estimating system to the ACO on a timely basis.
(4) The Contractor’s estimating system shall provide for the use of appropriate source data, utilize sound estimating techniques and good judgment, maintain a consistent approach, and adhere to established policies and procedures. An acceptable estimating system shall accomplish the following functions:
(i) Establish clear responsibility for preparation, review, and approval of cost estimates and budgets.
(ii) Provide a written description of the organization and duties of the personnel responsible for preparing, reviewing, and approving cost estimates and budgets.
(iii) Ensure that relevant personnel have sufficient training, experience, and guidance to perform estimating and budgeting tasks in accordance with the Contractor's established procedures.
(iv) Identify and document the sources of data and the estimating methods and rationale used in developing cost estimates and budgets.
(v) Provide for adequate supervision throughout the estimating and budgeting process.
(vi) Provide for consistent application of estimating and budgeting techniques.
(vii) Provide for detection and timely correction of errors.
(viii) Protect against cost duplication and omissions.
(ix) Provide for the use of historical experience, including historical vendor pricing data, where appropriate.
(x) Require use of appropriate analytical methods.
(xi) Integrate data and information available from other management systems.
(xii) Require management review, including verification of compliance with the company's estimating and budgeting policies, procedures, and practices.
(xiii) Provide for internal review of, and accountability for, the acceptability of the estimating system, including the budgetary data supporting indirect cost estimates and comparisons of projected results to actual results, and an analysis of any differences.
(xiv) Provide procedures to update cost estimates and notify the Contracting Officer in a timely manner throughout the negotiation process.
(xv) Provide procedures that ensure subcontract prices are reasonable based on a documented review and analysis provided with the prime proposal, when practicable.
(xvi) Provide estimating and budgeting practices that consistently generate sound proposals that are compliant with the provisions of the solicitation and are adequate to serve as a basis to reach a fair and reasonable price.
(xvii) Have an adequate system description, including policies, procedures, and estimating and budgeting practices, that comply with the Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement.
(e) Significant deficiencies.
(1) The Contracting Officer will provide an initial determination to the Contractor, in writing, of any significant deficiencies. The initial determination will describe the deficiency in sufficient detail to allow the Contractor to understand the deficiency.
(2) The Contractor shall respond within 30 days to a written initial determination from the Contracting Officer that identifies significant deficiencies in the Contractor's estimating system. If the Contractor disagrees with the initial determination, the Contractor shall state, in writing, its rationale for disagreeing.
(3) The Contracting Officer will evaluate the Contractor's response and notify the Contractor, in writing, of the Contracting Officer’s final determination concerning—
(i) Remaining significant deficiencies;
(ii) The adequacy of any proposed or completed corrective action; and
(iii) System disapproval, if the Contracting Officer determines that one or more significant deficiencies remain.
(f) If the Contractor receives the Contracting Officer’s final determination of significant deficiencies, the Contractor shall, within 45 days of receipt of the final determination, either correct the significant deficiencies or submit an acceptable corrective action plan showing milestones and actions to eliminate the significant deficiencies.
(g) Withholding payments. If the Contracting Officer makes a final determination to disapprove the Contractor’s estimating system, and the contract includes the clause at 252.242-7005, Contractor Business Systems, the Contracting Officer will withhold payments in accordance with that clause.
(End of clause)
252.215-7003 Requirement for Submission of Data Other Than Certified Cost or Pricing Data—Canadian Commercial Corporation.
As prescribed at 215.408(2)(i), use the following provision:
REQUIREMENT FOR SUBMISSION OF DATA OTHER THAN CERTIFIED COST OR PRICING DATA—CANADIAN COMMERCIAL CORPORATION (JUL 2012)
(a) Submission of certified cost or pricing data is not required.
(b) Canadian Commercial Corporation shall obtain and provide the following:
(i) Profit rate or fee (as applicable).
(ii) Analysis provided by Public Works and Government Services Canada to the Canadian Commercial Corporation to determine a fair and reasonable price (comparable to the analysis required at FAR 15.404-1).
(iii) Data other than certified cost or pricing data necessary to permit a determination by the U.S. Contracting Officer that the proposed price is fair and reasonable [U.S. Contracting Officer to insert description of the data required in accordance with FAR 15.403-3(a)(1)].
(c) As specified in FAR 15.403-3(a)(4), an offeror who does not comply with a requirement to submit data that the U.S. Contracting Officer has deemed necessary to determine price reasonableness or cost realism is ineligible for award unless the head of the contracting activity determines that it is in the best interest of the Government to make the award to that offeror.
(End of provision)
252.215-7004 Requirement for Submission of Data Other Than Certified Cost or Pricing Data—Modifications—Canadian Commercial Corporation.
As prescribed at 215.408(2)(ii), use the following clause:
REQUIREMENT FOR SUBMISSION OF DATA OTHER THAN CERTIFIED COST OR PRICING DATA—MODIFICATIONS—CANADIAN COMMERCIAL
CORPORATION (OCT 2013)
This clause , in lieu of FAR 52.215-21, applies only if award is to the Canadian Commercial Corporation.
(a) Submission of certified cost or pricing data is not required.
(b) Canadian Commercial Corporation shall obtain and provide the following for modifications that exceed the $150,000 [or higher dollar value specified by the U.S. Contracting Officer in the solicitation].
(i) Profit rate or fee (as applicable).
(ii) Analysis provided by Public Works and Government Services Canada to the Canadian Commercial Corporation to determine a fair and reasonable price (comparable to the analysis required at FAR 15.404-1).
(iii) Data other than certified cost or pricing data necessary to permit a determination by the U.S. Contracting Officer that the proposed price is fair and reasonable [U.S. Contracting Officer to insert description of the data required in accordance with FAR 15.403-3(a)(1)].
(End of clause)
252.215-7005 Evaluation Factor for Employing or Subcontracting with Members of the Selected Reserve.
As prescribed in 215.370-3(a), use the following provision:
EVALUATION FACTOR FOR EMPLOYING OR SUBCONTRACTING WITH MEMBERS OF THE SELECTED RESERVE (OCT 2008)
(a) Definition. “Selected Reserve,” as used in this provision, has the meaning given that term in 10 U.S.C. 10143. Selected Reserve members normally attend regular drills throughout the year and are the group of Reserves most readily available to the President.
(b) This solicitation includes an evaluation factor that considers the offeror’s intended use of employees, or individual subcontractors, who are members of the Selected Reserve.
(c) If the offeror, in the performance of any contract resulting from this solicitation, intends to use employees or individual subcontractors who are members of the Selected Reserve, the offeror’s proposal shall include documentation to support this intent. Such documentation may include, but is not limited to—
(1) Existing company documentation, such as payroll or personnel records, indicating the names of the Selected Reserve members who are currently employed by the company; or
(2) A statement that one or more positions will be set aside to be filled by new hires of Selected Reserve members, along with verifying documentation.
(End of provision)
252.215-7006 Use of Employees or Individual Subcontractors Who are Members of the Selected Reserve.
As prescribed in 215.370-3(b), use the following clause:
USE OF EMPLOYEES OR INDIVIDUAL SUBCONTRACTORS WHO ARE MEMBERS OF THE SELECTED RESERVE (OCT 2008)
(a) Definition. “Selected Reserve,” as used in this clause, has the meaning given that term in 10 U.S.C. 10143. Selected Reserve members normally attend regular drills throughout the year and are the group of Reserves most readily available to the President.
(b) If the Contractor stated in its offer that it intends to use members of the Selected Reserve in the performance of this contract—
(1) The Contractor shall use employees, or individual subcontractors, who are members of the Selected Reserve in the performance of the contract to the fullest extent consistent with efficient contract performance; and
(2) The Government has the right to terminate the contract for default if the Contractor willfully or intentionally fails to use members of the Selected Reserve, as employees or individual subcontractors, in the performance of the contract.
(End of clause)
252.215-7007 Notice of Intent to Resolicit.
As prescribed at 215.371-6, use the following provision:
NOTICE OF INTENT TO RESOLICIT (JUN 2012)
This solicitation provides offerors fewer than 30 days to submit proposals. In the event that only one offer is received in response to this solicitation, the Contracting Officer may cancel the solicitation and resolicit for an additional period of at least 30 days in accordance with 215.371-2.
(End of provision)
As prescribed at 215.408(3), use the following provision:
ONLY ONE OFFER (OCT 2013)
(a) After initial submission of offers, the Offeror agrees to submit any subsequently requested additional cost or pricing data if the Contracting Officer notifies the offeror that—
(1) Only one offer was received; and
(2) Additional cost or pricing data is required in order to determine whether the price is fair and reasonable or to comply with the statutory requirement for certified cost or pricing data (10 U.S.C. 2306a and FAR 15.403-3).
(b) Requirement for submission of additional cost or pricing data. Except as provided in paragraph (c) of this provision, the Offeror shall submit additional cost or pricing data as follows:
(1) If the Contracting Officer notifies the Offeror that additional cost or pricing data are required in accordance with paragraph (a) of this clause, the data shall be certified unless an exception applies (FAR 15.403-1(b)).
(2) Exceptions from certified cost or pricing data. In lieu of submitting certified cost or pricing data, the Offeror may submit a written request for exception by submitting the information described in the following paragraphs. The Contracting Officer may require additional supporting information, but only to the extent necessary to determine whether an exception should be granted, and whether the price is fair and reasonable.
(i) Identification of the law or regulation establishing the price offered. If the price is controlled under law by periodic rulings, reviews, or similar actions of a governmental body, attach a copy of the controlling document, unless it was previously submitted to the contracting office.
(ii) Commercial item exception. For a commercial item exception, the Offeror shall submit, at a minimum, information on prices at which the same item or/ similar items have previously been sold in the commercial market that is adequate for evaluating the reasonableness of the price for this acquisition. Such information may include—
(A) For catalog items, a copy of or identification of the catalog and its date, or the appropriate pages for the offered items, or a statement that the catalog is on file in the buying office to which the proposal is being submitted. Provide a copy or describe current discount policies and price lists (published or unpublished), e.g., wholesale, original equipment manufacturer, or reseller. Also explain the basis of each offered price and its relationship to the established catalog price, including how the proposed price relates to the price of recent sales in quantities similar to the proposed quantities;
(B) For market-priced items, the source and date or period of the market quotation or other basis for market price, the base amount, and applicable discounts. In addition, describe the nature of the market; or
(C) For items included on an active Federal Supply Service Multiple Award Schedule contract, proof that an exception has been granted for the schedule item.
(3) The Offeror grants the Contracting Officer or an authorized representative the right to examine, at any time before award, books, records, documents, or other directly pertinent records to verify any request for an exception under this provision, and the reasonableness of price. For items priced using catalog or market prices, or law or regulation, access does not extend to cost or profit information or other data relevant solely to the Offeror’s determination of the prices to be offered in the catalog or marketplace.
(4) Requirements for certified cost or pricing data. If the Offeror is not granted an exception from the requirement to submit certified cost or pricing data, the following applies:
(i) The Offeror shall prepare and submit certified cost or pricing data and supporting attachments in accordance with the instructions contained in Table 15-2 of FAR 15.408, which is incorporated by reference with the same force and effect as though it were inserted here in full text. The instructions in Table 15-2 are incorporated as a mandatory format to be used, unless the Contracting Officer and the Offeror agree to a different format.
(ii) As soon as practicable after agreement on price, but before contract award (except for unpriced actions such as letter contracts), the offeror shall submit a Certificate of Current Cost or Pricing Data, as prescribed by FAR 15.406-2.
(c) If the Offeror is the Canadian Commercial Corporation, certified cost or pricing data are not required. If the Contracting Officer notifies the Canadian Commercial Corporation that additional data other than certified cost or pricing data are required in accordance with 225.870-4(c), the Canadian Commercial Corporation shall obtain and provide the following:
(1) Profit rate or fee (as applicable).
(2) Analysis provided by Public Works and Government Services Canada to the Canadian Commercial Corporation to determine a fair and reasonable price (comparable to the analysis required at FAR 15.404-1).
(3) Data other than certified cost or pricing data necessary to permit a determination by the U.S. Contracting Officer that the proposed price is fair and reasonable [U.S. Contracting Officer to provide description of the data required in accordance with FAR 15.403-3(a)(1) with the notification].
(4) As specified in FAR 15.403-3(a)(4), an offeror who does not comply with a requirement to submit data that the U.S. Contracting Officer has deemed necessary to determine price reasonableness or cost realism is ineligible for award unless the head of the contracting activity determines that it is in the best interest of the Government to make the award to that offeror.
(d) If negotiations are conducted, the negotiated price should not exceed the offered price.
(End of provision)
252.215-7009 Proposal Adequacy Checklist.
As prescribed in 215.408(4), use the following provision:
PROPOSAL ADEQUACY CHECKLIST (JAN 2014)
The offeror shall complete the following checklist, providing location of requested information, or an explanation of why the requested information is not provided. In preparation of the offeror’s checklist, offerors may elect to have their prospective subcontractors use the same or similar checklist as appropriate.
PROPOSAL ADEQUACY CHECKLIST
(End of provision)
252.215-7010 Requirements for Certified Cost or Pricing Data and Data Other Than Certified Cost or Pricing Data.
Basic. As prescribed in 215.408(5)(i) and (5)(i)(A), use the following provision:
REQUIREMENTS FOR CERTIFIED COST OR PRICING DATA AND DATA OTHER THAN CERTIFIED COST OR PRICING DATA—BASIC (JAN 2018)
(a) Definitions. As used in this provision—
“Market prices” means current prices that are established in the course of ordinary trade between buyers and sellers free to bargain and that can be substantiated through competition or from sources independent of the offerors.
“Non-Government sales” means sales of the supplies or services to non-Governmental entities for purposes other than governmental purposes.
“Relevant sales data” means information provided by an offeror on sales of the same or similar items that can be used to establish price reasonableness taking into consideration the age, volume, and nature of the transactions (including any related discounts, refunds, rebates, offsets, or other adjustments).
“Sufficient non-Government sales” means relevant sales data that reflects market pricing and contains enough information to make adjustments covered by FAR 15.404-1(b)(2)(ii)(B).
“Uncertified cost data” means the subset of “data other than certified cost or pricing data” (see FAR 2.101) that relates to cost.
(b) Exceptions from certified cost or pricing data.
(1) In lieu of submitting certified cost or pricing data, the Offeror may submit a written request for exception by submitting the information described in paragraphs (b)(1)(i) and (ii) of this provision. The Contracting Officer may require additional supporting information, but only to the extent necessary to determine whether an exception should be granted and whether the price is fair and reasonable.
(i) Exception for prices set by law or regulation - Identification of the law or regulation establishing the prices offered. If the prices are controlled under law by periodic rulings, reviews, or similar actions of a governmental body, attach a copy of the controlling document, unless it was previously submitted to the contracting office.
(ii) Commercial item exception. For a commercial item exception, the Offeror shall submit, at a minimum, information that is adequate for evaluating the reasonableness of the price for this acquisition, including prices at which the same item or similar items have been sold in the commercial market. Such information shall include—
(A) For items previously determined to be commercial, the contract number and military department, defense agency, or other DoD component that rendered such determination, and if available, a Government point of contact;
(B) For items priced based on a catalog—
(1) A copy of or identification of the Offeror’s current catalog showing the price for that item; and
(2) If the catalog pricing provided with this proposal is not consistent with all relevant sales data, a detailed description of differences or inconsistencies between or among the relevant sales data, the proposed price, and the catalog price (including any related discounts, refunds, rebates, offsets, or other adjustments);
(C) For items priced based on market pricing, a description of the nature of the commercial market, the methodology used to establish a market price, and all relevant sales data. The description shall be adequate to permit DoD to verify the accuracy of the description;
(D) For items included on an active Federal Supply Service Multiple Award Schedule contract, proof that an exception has been granted for the schedule item; or
(E) For items provided by nontraditional defense contractors, a statement that the entity is not currently performing and has not performed, for at least the 1-year period preceding the solicitation of sources by DoD for the procurement or transaction, any contract or subcontract for DoD that is subject to full coverage under the cost accounting standards prescribed pursuant to 41 U.S.C. 1502 and the regulations implementing such section.
(2) The Offeror grants the Contracting Officer or an authorized representative the right to examine, at any time before award, books, records, documents, or other directly pertinent records to verify any request for an exception under this provision, and to determine the reasonableness of price.
(c) Requirements for certified cost or pricing data. If the Offeror is not granted an exception from the requirement to submit certified cost or pricing data, the following applies:
(1) The Offeror shall prepare and submit certified cost or pricing data and supporting attachments in accordance with the instructions contained in Table 15-2 of FAR 15.408, which is incorporated by reference with the same force and effect as though it were inserted here in full text. The instructions in Table 15-2 are incorporated as a mandatory format to be used in any resultant contract, unless the Contracting Officer and the Offeror agree to a different format and change this provision to use Alternate I.
(2) As soon as practicable after agreement on price, but before contract award (except for unpriced actions such as letter contracts), the Offeror shall submit a Certificate of Current Cost or Pricing Data, as prescribed by FAR 15.406-2.
(d) Requirements for data other than certified cost or pricing data.
(1) Data other than certified cost or pricing data submitted in accordance with this provision shall include the minimum information necessary to permit a determination that the proposed price is fair and reasonable, to include the requirements in DFARS 215.402(a)(i) and 215.404-1(b).
(2) In cases in which uncertified cost data is required, the information shall be provided in the form in which it is regularly maintained by the Offeror or prospective subcontractor in its business operations.
(3) Within 10 days of a written request from the Contracting Officer for additional information to permit an adequate evaluation of the proposed price in accordance with FAR 15.403-3, the Offeror shall provide either the requested information, or a written explanation for the inability to fully comply.
(4) Subcontract price evaluation.
(i) Offerors shall obtain from subcontractors the minimum information necessary to support a determination of price reasonableness, as described in FAR part 15 and DFARS part 215.
(ii) No cost data may be required from a prospective subcontractor in any case in which there are sufficient non-Government sales of the same item to establish reasonableness of price.
(iii) If the Offeror relies on relevant sales data for similar items to determine the price is reasonable, the Offeror shall obtain only that technical information necessary—
(A) To support the conclusion that items are technically similar; and
(B) To explain any technical differences that account for variances between the proposed prices and the sales data presented.
(e) Subcontracts. The Offeror shall insert the substance of this provision, including this paragraph (e), in subcontracts exceeding the simplified acquisition threshold defined in FAR part 2. The Offeror shall require prospective subcontractors to adhere to the requirements of—
(1) Paragraphs (c) and (d) of this provision for subcontracts above the threshold for submission of certified cost or pricing data in FAR 15.403-4; and
(2) Paragraph (d) of this provision for subcontracts exceeding the simplified acquisition threshold defined in FAR part 2.
(End of provision)
Alternate I. As prescribed in 215.408(5)(i) and (5)(i)(B), use the following provision,
which includes different paragraphs (c)(1) and (d)(3) than the basic clause.
REQUIREMENTS FOR CERTIFIED COST OR PRICING DATA AND DATA OTHER THAN CERTIFIED COST OR PRICING DATA—ALTERNATE I
(JAN 2018)
(a) Definitions. As used in this provision—
“Market prices” means current prices that are established in the course of ordinary trade between buyers and sellers free to bargain and that can be substantiated through competition or from sources independent of the offerors.
“Non-Government sales” means sales of the supplies or services to non-Governmental entities for purposes other than governmental purposes.
“Relevant sales data” means information provided by an offeror on sales of the same or similar items that can be used to establish price reasonableness taking into consideration the age, volume, and nature of the transactions (including any related discounts, refunds, rebates, offsets, or other adjustments).
“Sufficient non-Government sales” means relevant sales data that reflects market pricing and contains enough information to make adjustments covered by FAR 15.404-1(b)(2)(ii)(B).
“Uncertified cost data” means the subset of “data other than certified cost or pricing data” (see FAR 2.101) that relates to cost.
(b) Exceptions from certified cost or pricing data.
(1) In lieu of submitting certified cost or pricing data, the Offeror may submit a written request for exception by submitting the information described in paragraphs (b)(1)(i) and (ii) of this provision. The Contracting Officer may require additional supporting information, but only to the extent necessary to determine whether an exception should be granted and whether the price is fair and reasonable.
(i) Exception for price set by law or regulation - Identification of the law or regulation establishing the price offered. If the price is controlled under law by periodic rulings, reviews, or similar actions of a governmental body, attach a copy of the controlling document, unless it was previously submitted to the contracting office.
(ii) Commercial item exception. For a commercial item exception, the Offeror shall submit, at a minimum, information that is adequate for evaluating the reasonableness of the price for this acquisition, including prices at which the same item or similar items have been sold in the commercial market. Such information shall include—
(A) For items previously determined to be commercial, the contract number and military department, defense agency, or other DoD component that rendered such determination, and if available, a Government point of contact;
(B) For items priced based on a catalog—
(1) A copy of or identification of the Offeror’s current catalog showing the price for that item; and
(2) If the catalog pricing provided with this proposal is not consistent with all relevant sales data, a detailed description of differences or inconsistencies between or among the relevant sales data, the proposed price, and the catalog price (including any related discounts, refunds, rebates, offsets, or other adjustments);
(C) For items priced based on market pricing, a description of the nature of the commercial market, the methodology used to establish a market price, and all relevant sales data. The description shall be adequate to permit DoD to verify the accuracy of the description;
(D) For items included on an active Federal Supply Service Multiple Award Schedule contract, proof that an exception has been granted for the schedule item; or
(E) For items provided by nontraditional defense contractors, a statement that the entity is not currently performing and has not performed, for at least the 1-year period preceding the solicitation of sources by DoD for the procurement or transaction, any contract or subcontract for DoD that is subject to full coverage under the cost accounting standards prescribed pursuant to 41 U.S.C. 1502 and the regulations implementing such section.
(2) The Offeror grants the Contracting Officer or an authorized representative the right to examine, at any time before award, books, records, documents, or other directly pertinent records to verify any request for an exception under this provision, and to determine the reasonableness of price.
(c) Requirements for certified cost or pricing data. If the Offeror is not granted an exception from the requirement to submit certified cost or pricing data, the following applies:
(1) The Offeror shall submit certified cost or pricing data and supporting attachments in the following format: [Insert description of the data and format that are required, and include access to records necessary to permit an adequate evaluation of the proposed price in accordance with FAR 15.408, Table 15-2, Note 2. The Contracting Officer shall insert the description at the time of issuing the solicitation or specify that the format regularly maintained by the offeror or prospective subcontractor in its business operations will be acceptable. The Contracting Officer may amend the description as the result of negotiations.]
(2) As soon as practicable after agreement on price, but before contract award (except for unpriced actions such as letter contracts), the Offeror shall submit a Certificate of Current Cost or Pricing Data, as prescribed by FAR 15.406-2.
(d) Requirements for data other than certified cost or pricing data.
(1) Data other than certified cost or pricing data submitted in accordance with this provision shall include all data necessary to permit a determination that the proposed price is fair and reasonable, to include the requirements in DFARS 215.402(a)(i) and 215.404-1(b).
(2) In cases in which uncertified cost data is required, the information shall be provided in the form in which it is regularly maintained by the Offeror or prospective subcontractor in its business operations.
(3) The Offeror shall provide information described as follows: [Insert description of the data and the format that are required, including access to records necessary to permit an adequate evaluation of the proposed price in accordance with FAR 15.403-3].
(4) Within 10 days of a written request from the Contracting Officer for additional information to support proposal analysis, the Offeror shall provide either the requested information, or a written explanation for the inability to fully comply.
(5) Subcontract price evaluation.
(i) Offerors shall obtain from subcontractors the information necessary to support a determination of price reasonableness, as described in FAR part 15 and DFARS part 215.
(ii) No cost information may be required from a prospective subcontractor in any case in which there are sufficient non-Government sales of the same item to establish reasonableness of price.
(iii) If the Offeror relies on relevant sales data for similar items to determine the price is reasonable, the Offeror shall obtain only that technical information necessary—
(A) To support the conclusion that items are technically similar; and
(B) To explain any technical differences that account for variances between the proposed prices and the sales data presented.
(e) Subcontracts. The Offeror shall insert the substance of this provision, including this paragraph (e), in all subcontracts exceeding the simplified acquisition threshold defined in FAR part 2. The Offeror shall require prospective subcontractors to adhere to the requirements of—
(1) Paragraph (c) and (d) of this provision for subcontracts above the threshold for submission of certified cost or pricing data in FAR 15.403-4; and
(2) Paragraph (d) of this provision for subcontracts exceeding the simplified acquisition threshold defined in FAR part 2.
(End of provision)
252.215-7011 Requirements for Submission of Proposals to the Administrative Contracting Officer and Contract Auditor.
As prescribed in 215.408(5)(ii), use the following provision:
REQUIREMENTS FOR SUBMISSION OF PROPOSALS TO THE ADMINISTRATIVE CONTRACTING OFFICER AND CONTRACT AUDITOR
(JAN 2018)
When the proposal is submitted, the Offeror shall also submit one copy each to—
(a) The Administrative Contracting Officer; and
(b) The Contract Auditor.
(End of provision)
252.215-7012 Requirements for Submission of Proposals via Electronic Media.
As prescribed in 215.408(5)(iii), use the following provision:
REQUIREMENTS FOR SUBMISSION OF PROPOSALS VIA ELECTRONIC MEDIA (JAN 2018)
The Offeror shall submit the cost portion of the proposal via the following electronic media: [Insert media format, e.g., electronic spreadsheet format, electronic mail, etc.]
(End of provision)
252.215-7013 Supplies and Services Provided by Nontraditional Defense Contractors.
As prescribed in 215.408(6), use the following provision:
SUPPLES AND SERVICES PROVIDED BY NONTRADITIONAL DEFENSE CONTRACTORS (JAN 2018)
Offerors are advised that in accordance with 10 U.S.C. 2380a, supplies and services provided by a nontraditional defense contractor, as defined in DFARS 212.001, may be treated as commercial items. The decision to apply commercial item procedures to the procurement of supplies and services from a nontraditional defense contractor does not require a commercial item determination and does not mean the supplies or services are commercial.
(End of provision)
252.215-7014 Exception from Certified Cost or Pricing Data Requirements for Foreign Military Sales Indirect Offsets.
As prescribed in 215.408(8), use the following clause:
EXCEPTION FROM CERTIFIED COST OR PRICING DATA REQUIREMENTS FOR FOREIGN MILITARY SALES INDIRECT OFFSETS (JUN 2018)
(a) Definition. As used in this clause—
“Offset” means a benefit or obligation agreed to by a contractor and a foreign government or international organization as an inducement or condition to purchase supplies or services pursuant to a foreign military sale (FMS). There are two types of offsets: direct offsets and indirect offsets.
(1) A direct offset involves benefits or obligations, including supplies or services that are directly related to the item being purchased and are integral to the deliverable of the FMS contract. For example, as a condition of a foreign military sale, the contractor may require or agree to permit the customer to produce in its country certain components or subsystems of the item being sold. Generally, direct offsets must be performed within a specified period, because they are integral to the deliverable of the FMS contract.
(2) An indirect offset involves benefits or obligations, including supplies or services that are not directly related to the specific item(s) being purchased and are not integral to the deliverable of the FMS contract. For example, as a condition of a foreign military sale, the contractor may agree to purchase certain manufactured products, agricultural commodities, raw materials, or services, or make an equity investment or grant of equipment required by the FMS customer, or may agree to build a school, road or other facility. Indirect offsets would also include projects that are related to the FMS contract but not purchased under said contract (e.g., a project to develop or advance a capability, technology transfer, or know-how in a foreign company). Indirect offsets may be accomplished without a clearly defined period of performance.
(b) Exceptions from certified cost or pricing data requirements. Notwithstanding the requirements of Federal Acquisition Regulation (FAR) 52.215-20, Requirements for Certified Cost or Pricing Data and Data Other Than Certified Cost or Pricing Data, in the case of this contract or a subcontract, and FAR 52.215-21, Requirements for Certified Cost or Pricing Data and Data Other Than Certified Cost or Pricing Data—Modifications, in the case of modification of this contract or a subcontract, submission of certified cost or pricing data shall not be required to the extent such data relates to an indirect offset (10 U.S.C. 2306a(b)(1)).
(End of clause)
252.216-7000 Economic Price Adjustment—Basic Steel, Aluminum, Brass, Bronze, or Copper Mill Products.
As prescribed in 216.203-4-70(a)(1), use the following clause:
ECONOMIC PRICE ADJUSTMENT—BASIC STEEL, ALUMINUM, BRASS, BRONZE, OR COPPER MILL PRODUCTS (MAR 2012)
(a) Definitions. As used in this clause
“Established price” means a price which is an established catalog or market price for a commercial item sold in substantial quantities to the general public.
“Unit price” excludes any part of the price which reflects requirements for preservation, packaging, and packing beyond standard commercial practice.
(b) As represented by the Contractor in its offer, the unit price stated for ____________________(Identify the item) is not in excess of the Contractor's established price in effect on the date set for opening of bids (or the contract date if this is a negotiated contract) for like quantities of the same item. This price is the net price after applying any applicable standard trade discounts offered by the Contractor from its catalog, list, or schedule price.
(c) The Contractor shall promptly notify the Contracting Officer of the amount and effective date of each decrease in any established price.
(1) Each corresponding contract unit price shall be decreased by the same percentage that the established price is decreased.
(2) This decrease shall apply to items delivered on or after the effective date of the decrease in the Contractor's established price.
(3) This contract shall be modified accordingly.
(d) If the Contractor's established price is increased after the date set for opening of bids (or the contract date if this is a negotiated contract), upon the Contractor's written request to the Contracting Officer, the corresponding contract unit price shall be increased by the same percentage that the established price is increased, and this contract shall be modified accordingly, provided—
(1) The aggregate of the increases in any contract unit price under this contract shall not exceed 10 percent of the original contract unit price;
(2) The increased contract unit price shall be effective on the effective date of the increase in the applicable established price if the Contractor's written request is received by the Contracting Officer within ten days of the change. If it is not, the effective date of the increased unit price shall be the date of receipt of the request by the Contracting Officer; and
(3) The increased contract unit price shall not apply to quantities scheduled for delivery before the effective date of the increased contract unit price unless the Contractor's failure to deliver before that date results from causes beyond the control and without the fault or negligence of the Contractor, within the meaning of the Default clause of this contract.
(4) The Contracting Officer shall not execute a modification incorporating an increase in a contract unit price under this clause until the increase is verified.
(e) Within 30 days after receipt of the Contractor's written request, the Contracting Officer may cancel, without liability to either party, any portion of the contract affected by the requested increase and not delivered at the time of such cancellation, except as follows—
(1) The Contractor may, after that time, deliver any items that were completed or in the process of manufacture at the time of receipt of the cancellation notice, provided the Contractor notifies the Contracting Officer of such items within 10 days after the Contractor receives the cancellation notice.
(2) The Government shall pay for those items at the contract unit price increased to the extent provided by paragraph (d) of this clause.
(3) Any standard steel supply item shall be deemed to be in the process of manufacture when the steel for that item is in the state of processing after the beginning of the furnace melt.
(f) Pending any cancellation of this contract under paragraph (e) of this clause, or if there is no cancellation, the Contractor shall continue deliveries according to the delivery schedule of the contract. The Contractor shall be paid for those deliveries at the contract unit price increased to the extent provided by paragraph (d) of this clause.
(End of clause)
252.216-7001 Economic Price Adjustment–Nonstandard Steel Items.
As prescribed in 216.203-4-70(b), use the following clause:
ECONOMIC PRICE ADJUSTMENT--NONSTANDARD STEEL ITEMS (JUL 1997)
(a) Definitions. As used in this clause—
“Base labor index” means the average of the labor indices for the three months which consist of the month of bid opening (or offer submission) and the months immediately preceding and following that month.
“Base steel index” means the Contractor's established price (see Note 6) including all applicable extras of $________ per ____________ (see Note 1) for _______________ (see Note 2) on the date set for bid opening (or the date of submission of the offer).
“Current labor index” means the average of the labor indices for the month in which delivery of supplies is required to be made and the month preceding.
“Current steel index” means the Contractor's established price (see Note 6) for that item, including all applicable extras in effect ___ days (see Note 3) prior to the first day of the month in which delivery is required.
“Established price” is—
(1) A price which is an established catalog or market price of a commercial item sold in substantial quantities to the general public; and
(2) The net price after applying any applicable standard trade discounts offered by the Contractor from its catalog, list, or schedule price. (But see Note 6.)
“Labor index” means the average straight time hourly earnings of the Contractor's employees in the ____________ shop of the Contractor's ________________ plant (see Note 4) for any particular month.
“Month” means calendar month. However, if the Contractor's accounting period does not coincide with the calendar month, then that accounting period shall be used in lieu of “month.”
(b) Each contract unit price shall be subject to revision, under the terms of this clause, to reflect changes in the cost of labor and steel. For purpose of this price revision, the proportion of the contract unit price attributable to costs of labor not otherwise included in the price of the steel item identified under the “base steel index” definition in paragraph (a) shall be _____ percent, and the proportion of the contract unit price attributable to the cost of steel shall be _____ percent. (See Note 5.)
(c)(1) Unless otherwise specified in this contract, the labor index shall be computed by dividing the total straight time earnings of the Contractor's employees in the shop identified in paragraph (a) for any given month by the total number of straight time hours worked by those employees in that month.
(2) Any revision in a contract unit price to reflect changes in the cost of labor shall be computed solely by reference to the “base labor index” and the “current labor index.”
(d) Any revision in a contract unit price to reflect changes in the cost of steel shall be computed solely by reference to the “base steel index” and the “current steel index.”
(e)(1) Each contract unit price shall be revised for each month in which delivery of supplies is required to be made.
(2) The revised contract unit price shall apply to the deliveries of those quantities required to be made in that month regardless of when actual delivery is made.
(3) Each revised contract unit price shall be computed by adding—
(i) The adjusted cost of labor (obtained by multiplying ____ percent of the contract unit price by a fraction, of which the numerator shall be the current labor index and the denominator shall be the base labor index);
(ii) The adjusted cost of steel (obtained by multiplying ____ percent of the contract unit price by a fraction, of which the numerator shall be the current steel index and the denominator shall be the base steel index); and
(iii) The amount equal to ____ percent of the original contract unit price (representing that portion of the unit price which relates neither to the cost of labor nor the cost of steel, and which is therefore not subject to revision (see Note 5)).
(4) The aggregate of the increases in any contract unit price under this contract shall not exceed ten percent of the original contract unit price.
(5) Computations shall be made to the nearest one-hundredth of one cent.
(f)(1) Pending any revisions of the contract unit prices, the Contractor shall be paid the contract unit price for deliveries made.
(2) Within 30 days after final delivery (or such other period as may be authorized by the Contracting Officer), the Contractor shall furnish a statement identifying the correctness of—
(i) The average straight time hourly earnings of the Contractor's employees in the shop identified in paragraph (a) that are relevant to the computations of the “base labor index” and the “current labor index;” and
(ii) The Contractor's established prices (see Note 6), including all applicable extras for like quantities of the item that are relevant to the computation of the “base steel index” and the “current steel index.”
(3) Upon request of the Contracting Officer, the Contractor shall make available all records used in the computation of the labor indices.
(4) Upon receipt of the statement, the Contracting Officer will compute the revised contract unit prices and modify the contract accordingly. No modification to this contract will be made pursuant to this clause until the Contracting Officer has verified the revised established price (see Note 6).
(g)(1) In the event any item of this contract is subject to a total or partial termination for convenience, the month in which the Contractor receives notice of the termination, if prior to the month in which delivery is required, shall be considered the month in which delivery of the terminated item is required for the purposes of determining the current labor and steel indices under paragraphs (c) and (d).
(2) For any item which is not terminated for convenience, the month in which delivery is required under the contract shall continue to apply for determining those indices with respect to the quantity of the non-terminated item.
(3) If this contract is terminated for default, any price revision shall be limited to the quantity of the item which has been delivered by the Contractor and accepted by the Government prior to receipt by the Contractor of the notice of termination.
(h) If the Contractor's failure to make delivery of any required quantity arises out of causes beyond the control and without the fault or negligence of the Contractor, within the meaning of the clause of this contract entitled “Default,” the quantity not delivered shall be delivered as promptly as possible after the cessation of the cause of the failure, and the delivery schedule set forth in this contract shall be amended accordingly.
NOTES:
1 Offeror insert the unit price and unit measure of the standard steel mill item to be used in the manufacture of the contract item.
2 Offeror identify the standard steel mill item to be used in the manufacture of the contract item.
3 Offeror insert best estimate of the number of days required for processing the standard steel mill item in the shop identified under the “labor index” definition.
4 Offeror identify the shop and plant in which the standard steel mill item identified under the “base steel index” definition will be finally fabricated or processed into the contract item.
5 Offeror insert the same percentage figures for the corresponding blanks in paragraphs (b), (e)(3)(i), and (e)(3)(ii). In paragraph (e)(3)(iii), insert the percentage representing the difference between the sum of the percentages inserted in paragraph (b) and 100 percent.
6 In negotiated acquisitions of nonstandard steel items, when there is no “established price” or when it is not desirable to use this price, this paragraph may refer to another appropriate price basis, e.g., an established interplant price.
(End of clause)
252.216-7002 Alternate A, Time-and-Materials/Labor-Hour Proposal Requirements – Non-Commercial Item Acquisition with Adequate Price Competition.
As prescribed in 216.601(e), substitute the following paragraph (c) for paragraph (c) of the provision at FAR 52.216-29:
ALTERNATE A, TIME-AND-MATERIALS/LABOR-HOUR
PROPOSAL REQUIREMENTS—NON-COMMERCIAL ITEM ACQUISITION
WITH ADEQUATE PRICE COMPETITION (FEB 2007)
(c) The offeror must establish fixed hourly rates using separate rates for each category of labor to be performed by each subcontractor and for each category of labor to be performed by the offeror, and for each category of labor to be transferred between divisions, subsidiaries, or affiliates of the offeror under a common control.
252.216-7003 Economic Price Adjustment—Wage Rates or Material Prices Controlled by a Foreign Government.
As prescribed in 216.203-4-70(c)(1), use the following clause:
ECONOMIC PRICE ADJUSTMENT—WAGE RATES OR MATERIAL PRICES CONTROLLED BY A FOREIGN GOVERNMENT (MAR 2012)
(a) As represented by the Contractor in its offer, the prices set forth in this contract
(1) Are based on the wage rate(s) or material price(s) established and controlled by the government of the country specified by the Contractor in its offer; and
(2) Do not include contingency allowances to pay for possible increases in wage rates or material prices.
(b) If wage rates or material prices are revised by the government named in paragraph (a) of this clause, the Contracting Officer shall make an equitable adjustment in the contract price and shall modify the contract to the extent that the Contractor’s actual costs of performing this contract are increased or decreased, as a direct result of the revision, subject to the following:
(1) For increases in established wage rates or material prices, the increase in contract unit price(s) shall be effective on the same date that the government named in paragraph (a) of this clause increased the applicable wage rate(s) or material price(s), but only if the Contracting Officer receives the Contractor’s written request for contract adjustment within 10 days of the change. If the Contractor’s request is received later, the effective date shall be the date that the Contracting Officer received the Contractor’s request.
(2) For decreases in established wage rates or material prices, the decrease in contract unit price(s) shall be effective on the same date that the government named in paragraph (a) of this clause decreased the applicable wage rate(s) or material price(s). The decrease in contract unit price(s) shall apply to all items delivered on and after the effective date of the government’s rate or price decrease.
(c) No modification changing the contract unit price(s) shall be executed until the Contracting Officer has verified the applicable change in the rates or prices set by the government named in paragraph (a) of this clause. The Contractor shall make available its books and records that support a requested change in contract price.
(d) Failure to agree to any adjustment shall be a dispute under the Disputes clause of this contract.
(End of clause)
252.216–7004 Award Fee Reduction or Denial for Jeopardizing the Health or Safety of Government Personnel.
As prescribed in 216.406(e), use the following clause:
AWARD FEE REDUCTION OR DENIAL FOR JEOPARDIZING THE HEALTH OR
SAFETY OF GOVERNMENT PERSONNEL (SEP 2011)
(a) Definitions. As used in this clause—
“Covered incident”–
(i) Means any incident in which the Contractor, through a criminal, civil, or administrative proceeding that results in a disposition listed in paragraph (a) (ii) of this definition –
(A) Has been determined in the performance of this contract to have caused serious bodily injury or death of any civilian or military personnel of the Government through gross negligence or with reckless disregard for the safety of such personnel; or
(B) Has been determined to be liable for actions of a subcontractor of the Contractor that caused serious bodily injury or death of any civilian or military personnel of the Government through gross negligence or with reckless disregard for the safety of such personnel.
(ii) Includes those incidents that have resulted in any of the following dispositions:
(A) In a criminal proceeding, a conviction.
(B) In a civil proceeding, a finding of fault or liability that results in the payment of a monetary fine, penalty, reimbursement, restitution, or damage of $5,000 or more.
(C) In an administrative proceeding, a finding of fault and liability that results in–
(1) The payment of a monetary fine or penalty of $5,000 or more; or
(2) The payment of a reimbursement, restitution, or damages in excess of $100,000.
(D) In a criminal, civil, or administrative proceeding, a disposition of the matter by consent or compromise with an acknowledgment of fault by the Contractor if the proceeding could have led to any of the outcomes specified in subparagraphs (a)(ii)(A), (a) (ii)(B), or (a)(ii)(C).
(E) In a DoD investigation of the Contractor or its subcontractors at any tier not subject to the jurisdiction of the U.S. courts, a final determination by the Secretary of Defense of Contractor or subcontractor fault (see DFARS 216.405-2-70).
“Serious bodily injury” means a grievous physical harm that results in a permanent disability.
(b) If, in the performance of this contract, the Contractor’s or its subcontractor’s actions cause serious bodily injury or death of civilian or military Government personnel, the Government may reduce or deny the award fee for the relevant award fee period in which the covered incident occurred, including the recovery of all or part of any award fees paid for any previous period during which the covered incident occurred.
(End of clause)
As prescribed in 216.506(a), use the following clause:
ORDERING (MAY 2011)
(a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the contract schedule. Such orders may be issued from __________ through ____________ [insert dates].
(b) All delivery orders or task orders are subject to the terms and conditions of this contract. In the event of conflict between a delivery order or task order and this contract, the contract shall control.
(c)(1) If issued electronically, the order is considered “issued” when a copy has been posted to the Electronic Document Access system, and notice has been sent to the Contractor.
(2) If mailed or transmitted by facsimile, a delivery order or task order is considered “issued” when the Government deposits the order in the mail or transmits by facsimile. Mailing includes transmittal by U.S. mail or private delivery services.
(3) Orders may be issued orally only if authorized in the schedule.
(End of Clause)
252.216-7007 Economic Price Adjustment—Basic Steel, Aluminum, Brass, Bronze, or Copper Mill Products—Representation.
As prescribed in 216.203-4-70(a)(2), use the following provision:
ECONOMIC PRICE ADJUSTMENT—BASIC STEEL, ALUMINUM, BRASS, BRONZE, OR COPPER MILL PRODUCTS—REPRESENTATION
(MAR 2012)
(a) Definitions. The terms “established price” and “unit price,” as used in this provision, have the meaning given in the clause 252.216-7000, Economic Price Adjustment--Basic Steel, Aluminum, Brass, Bronze, or Copper Mill Products.
(b) By submission of its offer, the offeror represents that the unit price stated in this offer for ______________________(Identify the item) is not in excess of the offeror’s established price in effect on the date set for opening of bids (or the contract date if this is to be a negotiated contract) for like quantities of the same item. This price is the net price after applying any applicable standard trade discounts offered by the offeror from its catalog, list, or schedule price.
(End of provision)
252.216-7008 Economic Price Adjustment—Wage Rates or Material Prices Controlled by a Foreign Government—Representation.
As prescribed in 216.203-4-70(c)(2), use the following provision:
ECONOMIC PRICE ADJUSTMENT—WAGE RATES OR MATERIAL PRICES CONTROLLED BY A FOREIGN GOVERNMENT—REPRESENTATION
(MAR 2012)
(a) By submission of its offer, the offeror represents that the prices set forth in this offer
(1) Are based on the wage rate(s) or material price(s) established and controlled by the government of __________________________ (Offeror insert name of host country); and
(2) Do not include contingency allowances to pay for possible increases in wage rates or material prices.
(End of provision)
252.216-7009 Allowability of Legal Costs Incurred in Connection With a Whistleblower Proceeding.
As prescribed in 216.307(a), use the following clause:
ALLOWABILITY OF LEGAL COSTS INCURRED IN CONNECTION WITH A WHISTLEBLOWER PROCEEDING (SEP 2013)
Pursuant to section 827 of the National Defense Authorization Act for Fiscal Year 2013 (Pub. L. 112-239), notwithstanding FAR clause 52.216-7, Allowable Cost and Payment—
(1) The restrictions of FAR 31.205-47(b) on allowability of costs related to legal and other proceedings also apply to any proceeding brought by a contractor employee submitting a complaint under 10 U.S.C. 2409, entitled “Contractor employees: protection from reprisal for disclosure of certain information;” and
(2) Costs incurred in connection with a proceeding that is brought by a contractor employee submitting a complaint under 10 U.S.C. 2409 are also unallowable if the result is an order to take corrective action under 10 U.S.C. 2409.
(End of clause)
252.217-7000 Exercise of Option to Fulfill Foreign Military Sales Commitments.
Basic. As prescribed in 217.208-70(a) and (a)(1), use the following clause:
EXERCISE OF OPTION TO FULFILL FOREIGN MILITARY SALES
COMMITMENTS—BASIC (NOV 2014)
(a) The Government may exercise the option(s) of this contract to fulfill foreign military sales commitments.
(b) The foreign military sales commitments are for:
(Insert name of country) |
(Insert applicable CLIN) |
(End of clause)
Alternate I. As prescribed in 217.208-70(a) and (a)(2), use the following clause,
which uses a different paragraph (b) than paragraph (b) of the basic clause:
EXERCISE OF OPTION TO FULFILL FOREIGN MILITARY SALES COMMITMENTS—ALTERNATE I (NOV 2014)
(a) The Government may exercise the option(s) of this contract to fulfill foreign military sales commitments.
(b) On the date the option is exercised, the Government shall identify the foreign country for the purpose of negotiating any equitable adjustment attributable to foreign military sales. Failure to agree on an equitable adjustment shall be treated as a dispute under the Disputes clause of this contract.
(End of clause)
As prescribed in 217.208-70(b), use the following clause:
SURGE OPTION (AUG 1992)
(a) General. The Government has the option to—
(1) Increase the quantity of supplies or services called for under this contract by no more than ___ percent; and/or
(2) Accelerate the rate of delivery called for under this contract, at a price or cost established before contract award or to be established by negotiation as provided in this clause.
(b) Schedule.
(1) When the Production Surge Plan (DI-MGMT-80969) is included in the contract, the option delivery schedule shall be the production rate provided with the Plan. If the Plan was negotiated before contract award, then the negotiated schedule shall be used.
(2) If there is no Production Surge Plan in the contract, the Contractor shall, within 30 days from the date of award, furnish the Contracting Officer a delivery schedule showing the maximum sustainable rate of delivery for items in this contract. This delivery schedule shall provide acceleration by month up to the maximum sustainable rate of delivery achievable within the Contractor's existing facilities, equipment, and subcontracting structure.
(3) The Contractor shall not revise the option delivery schedule without approval from the Contracting Officer.
(c) Exercise of option.
(1) The Contracting Officer may exercise this option at any time before acceptance by the Government of the final scheduled delivery.
(2) The Contracting Officer will provide a preliminary oral or written notice to the Contractor stating the quantities to be added or accelerated under the terms of this clause, followed by a contract modification incorporating the transmitted information and instructions. The notice and modification will establish a not-to-exceed price equal to the highest contract unit price or cost of the added or accelerated items as of the date of the notice.
(3) The Contractor will not be required to deliver at a rate greater than the maximum sustainable delivery rate under paragraph (b)(2) of this clause, nor will the exercise of this option extend delivery more than 24 months beyond the scheduled final delivery.
(d) Price negotiation.
(1) Unless the option cost or price was previously agreed upon, the Contractor shall, within 30 days from the date of option exercise, submit to the Contracting Officer a cost or price proposal (including a cost breakdown) for the added or accelerated items.
(2) Failure to agree on a cost or price in negotiations resulting from the exercise of this option shall constitute a dispute concerning a question of fact within the meaning of the Disputes clause of this contract. However, nothing in this clause shall excuse the Contractor from proceeding with the performance of the contract, as modified, while any resulting claim is being settled.
(End of clause)
252.217-7002 Offering Property for Exchange.
As prescribed in 217.7005, use the following provision:
OFFERING PROPERTY FOR EXCHANGE (JUN 2012)
(a) The property described in item number ____________, is being offered in accordance with the exchange provisions of 40 U.S.C. 503.
(b) The property is located at (insert address) . Offerors may inspect the property during the period (insert beginning and ending dates and insert hours during day) .
(End of provision)
As prescribed in 217.7104(a), use the following clause:
CHANGES (DEC 1991)
(a) The Contracting Officer may, at any time and without notice to the sureties, by written change order, make changes within the general scope of any job order issued under the Master Agreement in—
(1) Drawings, designs, plans, and specifications;
(2) Work itemized;
(3) Place of performance of the work;
(4) Time of commencement or completion of the work; and
(5) Any other requirement of the job order.
(b) If a change causes an increase or decrease in the cost of, or time required for, performance of the job order, whether or not changed by the order, the Contracting Officer shall make an equitable adjustment in the price or date of completion, or both, and shall modify the job order in writing.
(1) Within ten days after the Contractor receives notification of the change, the Contractor shall submit to the Contracting Officer a request for price adjustment, together with a written estimate of the increased cost.
(2) The Contracting Officer may grant an extension of this period if the Contractor requests it within the ten day period.
(3) If the circumstances justify it, the Contracting Officer may accept and grant a request for equitable adjustment at any later time prior to final payment under the job order, except that the Contractor may not receive profit on a payment under a late request.
(c) If the Contractor includes in its claim the cost of property made obsolete or excess as a result of a change, the Contracting Officer shall have the right to prescribe the manner of disposition of that property.
(d) Failure to agree to any adjustment shall be a dispute within the meaning of the Disputes clause.
(e) Nothing in this clause shall excuse the Contractor from proceeding with the job order as changed.
(End of clause)
252.217-7004 Job Orders and Compensation.
As prescribed in 217.7104(a), use the following clause:
JOB ORDERS AND COMPENSATION (MAY 2006)
(a) The Contracting Officer shall solicit bids or proposals and make award of job orders. The issuance of a job order signed by the Contracting Officer constitutes award. The job order shall incorporate the terms and conditions of the Master Agreement.
(b) Whenever the Contracting Officer determines that a vessel, its cargo or stores, would be endangered by delay, or whenever the Contracting Officer determines that military necessity requires that immediate work on a vessel is necessary, the Contracting Officer may issue a written order to perform that work and the Contractor hereby agrees to comply with that order and to perform work on such vessel within its capabilities.
(1) As soon as practicable after the issuance of the order, the Contracting Officer and the Contractor shall negotiate a price for the work and the Contracting Officer shall issue a job order covering the work.
(2) The Contractor shall, upon request, furnish the Contracting Officer with a breakdown of costs incurred by the Contractor and an estimate of costs expected to be incurred in the performance of the work. The Contractor shall maintain, and make available for inspection by the Contracting Officer or the Contracting Officer's representative, records supporting the cost of performing the work.
(3) Failure of the parties to agree upon the price of the work shall constitute a dispute within the meaning of the Disputes clause of the Master Agreement. In the meantime, the Contractor shall diligently proceed to perform the work ordered.
(c)(1) If the nature of any repairs is such that their extent and probable cost cannot be ascertained readily, the Contracting Officer may issue a job order (on a sealed bid or negotiated basis) to determine the nature and extent of required repairs.
(2) Upon determination by the Contracting Officer of what work is necessary, the Contractor, if requested by the Contracting Officer, shall negotiate prices for performance of that work. The prices agreed upon shall be set forth in a modification of the job order.
(3) Failure of the parties to agree upon the price shall constitute a dispute under the Disputes clause. In the meantime, the Contractor shall diligently proceed to perform the work ordered.
(End of clause)
252.217-7005 Inspection and Manner of Doing Work.
As prescribed in 217.7104(a), use the following clause:
INSPECTION AND MANNER OF DOING WORK (JUL 2009)
(a) The Contractor shall perform work in accordance with the job order, any drawings and specifications made a part of the job order, and any change or modification issued under the Changes clause of the Master Agreement.
(b)(1) Except as provided in paragraph (b)(2) of this clause, and unless otherwise specifically provided in the job order, all operational practices of the Contractor and all workmanship, material, equipment, and articles used in the performance of work under the Master Agreement shall be in accordance with the best commercial marine practices and the rules and requirements of the American Bureau of Shipping, the U.S. Coast Guard, and the Institute of Electrical and Electronic Engineers, in effect at the time of Contractor's submission of bid (or acceptance of the job order, if negotiated).
(2) When Navy specifications are specified in the job order, the Contractor shall follow Navy standards of material and workmanship. The solicitation shall prescribe the Navy standard whenever applicable.
(c) The Government may inspect and test all material and workmanship at any time during the Contractor's performance of the work.
(1) If, prior to delivery, the Government finds any material or workmanship is defective or not in accordance with the job order, in addition to its rights under the Guarantees clause of the Master Agreement, the Government may reject the defective or nonconforming material or workmanship and require the Contractor to correct or replace it at the Contractor's expense.
(2) If the Contractor fails to proceed promptly with the replacement or correction of the material or workmanship, the Government may replace or correct the defective or nonconforming material or workmanship and charge the Contractor the excess costs incurred.
(3) As specified in the job order, the Contractor shall provide and maintain an inspection system acceptable to the Government.
(4) The Contractor shall maintain complete records of all inspection work and shall make them available to the Government during performance of the job order and for 90 days after the completion of all work required.
(d) The Contractor shall not permit any welder to work on a vessel unless the welder is, at the time of the work, qualified to the standards established by the U.S. Coast Guard, American Bureau of Shipping, or Department of the Navy for the type of welding being performed. Qualifications of a welder shall be as specified in the job order.
(e) The Contractor shall—
(1) Exercise reasonable care to protect the vessel from fire;
(2) Maintain a reasonable system of inspection over activities taking place in the vicinity of the vessel's magazines, fuel oil tanks, or storerooms containing flammable materials;
(3) Maintain a reasonable number of hose lines ready for immediate use on the vessel at all times while the vessel is berthed alongside the Contractor's pier or in dry dock or on a marine railway;
(4) Unless otherwise provided in a job order, provide sufficient security patrols to reasonably maintain a fire watch for protection of the vessel when it is in the Contractor's custody;
(5) To the extent necessary, clean, wash, and steam out or otherwise make safe, all tanks under alteration or repair;
(6) Furnish the Contracting Officer or designated representative with a copy of the “gas-free” or “safe-for-hotwork” certificate, provided by a Marine Chemist or Coast Guard authorized person in accordance with Occupational Safety and Health Administration regulations (29 CFR 1915.14) before any hot work is done on a tank;
(7) Treat the contents of any tank as Government property in accordance with the Government Property clause; and
(8) Dispose of the contents of any tank only at the direction, or with the concurrence, of the Contracting Officer.
(f) Except as otherwise provided in the job order, when the vessel is in the custody of the Contractor or in dry dock or on a marine railway and the temperature is expected to go as low as 35 oF, the Contractor shall take all necessary steps to—
(1) Keep all hose pipe lines, fixtures, traps, tanks, and other receptacles on the vessel from freezing; and
(2) Protect the stern tube and propeller hubs from frost damage.
(g) The Contractor shall, whenever practicable—
(1) Perform the required work in a manner that will not interfere with the berthing and messing of Government personnel attached to the vessel; and
(2) Provide Government personnel attached to the vessel access to the vessel at all times.
(h) Government personnel attached to the vessel shall not interfere with the Contractor's work or workers.
(i)(1) The Government does not guarantee the correctness of the dimensions, sizes, and shapes set forth in any job order, sketches, drawings, plans, or specifications prepared or furnished by the Government, unless the job order requires that the Contractor perform the work prior to any opportunity to inspect.
(2) Except as stated in paragraph (i)(1) of this clause, and other than those parts furnished by the Government, the Contractor shall be responsible for the correctness of the dimensions, sizes, and shapes of parts furnished under this agreement.
(j) The Contractor shall at all times keep the site of the work on the vessel free from accumulation of waste material or rubbish caused by its employees or the work. At the completion of the work, unless the job order specifies otherwise, the Contractor shall remove all rubbish from the site of the work and leave the immediate vicinity of the work area “broom clean.”
(End of clause)
As prescribed in 217.7104(a), use the following clause:
TITLE (DEC 1991)
(a) Unless otherwise provided, title to all materials and equipment to be incorporated in a vessel in the performance of a job order shall vest in the Government upon delivery at the location specified for the performance of the work.
(b) Upon completion of the job order, or with the approval of the Contracting Officer during performance of the job order, all Contractor-furnished materials and equipment not incorporated in, or placed on, any vessel, shall become the property of the Contractor, unless the Government has reimbursed the Contractor for the cost of the materials and equipment.
(c) The vessel, its equipment, movable stores, cargo, or other ship's materials shall not be considered Government-furnished property.
(End of clause)
As prescribed in 217.7104(a), use the following clause:
PAYMENTS (DEC 1991)
(a) “Progress payments,” as used in this clause, means payments made before completion of work in progress under a job order.
(b) Upon submission by the Contractor of invoices in the form and number of copies directed by the Contracting Officer, and as approved by the Contracting Officer, the Government will make progress payments as work progresses under the job order.
(1) Generally, the Contractor may submit invoices on a semi-monthly basis, unless expenditures justify a more frequent submission.
(2) The Government need not make progress payments for invoices aggregating less than $5,000.
(3) The Contracting Officer shall approve progress payments based on the value, computed on the price of the job order, of labor and materials incorporated in the work, materials suitably stored at the site of the work, and preparatory work completed, less the aggregate of any previous payments.
(4) Upon request, the Contractor will furnish the Contracting Officer any reports concerning expenditures on the work to date that the Contracting Officer may require.
(c) The Government will retain until final completion and acceptance of all work covered by the job order, an amount estimated or approved by the Contracting Officer under paragraph (b) of this clause. The amount retained will be in accordance with the rate authorized by Congress for Naval vessel repair contracts at the time of job order award.
(d) The Contracting Officer may direct that progress payments be based on the price of the job order as adjusted as a result of change orders under the Changes clause of the Master Agreement. If the Contracting Officer does not so direct—
(1) Payments of any increases shall be made from time to time after the amount of the increase is determined under the Changes clause of the Master Agreement; and
(2) Reductions resulting from decreases shall be made for the purposes of subsequent progress payments as soon as the amounts are determined under the Changes clause of the Master Agreement.
(e) Upon completion of the work under a job order and final inspection and acceptance, and upon submission of invoices in such form and with such copies as the Contracting Officer may prescribe, the Contractor shall be paid for the price of the job order, as adjusted pursuant to the Changes clause of the Master Agreement, less any performance reserves deemed necessary by the Contracting Officer, and less the amount of any previous payments.
(f) All materials, equipment, or any other property or work in process covered by the progress payments made by the Government, upon the making of those progress payments, shall become the sole property of the Government, and are subject to the provisions of the Title clause of the Master Agreement.
(End of clause)
As prescribed in 217.7104(a), use the following clause:
BONDS (DEC 1991)
(a) If the solicitation requires an offeror to submit a bid bond, the Offeror may furnish, instead, an annual bid bond (or evidence thereof) or an annual performance and payment bond (or evidence thereof).
(b) If the solicitation does not require a bid bond, the Offeror shall not include in the price any contingency to cover the premium of such a bond.
(c) Even if the solicitation does not require bonds, the Contracting Officer may nevertheless require a performance and payment bond, in form, amount, and with a surety acceptable to the Contracting Officer. Where performance and payment bond is required, the offer price shall be increased upon the award of the job order in an amount not to exceed the premium of a corporate surety bond.
(d) If any surety upon any bond furnished in connection with a job order under this agreement fails to submit requested reports as to its financial condition or otherwise becomes unacceptable to the Government, the Contracting Officer may require the Contractor to furnish whatever additional security the Contracting Officer determines necessary to protect the interests of the Government and of persons supplying labor or materials in the performance of the work contemplated under the Master Agreement.
(End of clause)
As prescribed in 217.7104(a), use the following clause:
DEFAULT (DEC 1991)
(a) The Government may, subject to the provisions of paragraph (b) of this clause, by written notice of default to the Contractor, terminate the whole or any part of a job order if the Contractor fails to—
(1) Make delivery of the supplies or to perform the services within the time specified in a job order or any extension;
(2) Make progress, so as to endanger performance of the job order; or
(3) Perform any of the other provisions of this agreement or a job order.
(b) Except for defaults of subcontractors, the Contractor shall not be liable for any excess costs if failure to perform the job order arises from causes beyond the control and without the fault or negligence of the Contractor. Examples of such causes include acts of God or of the public enemy, acts of the Government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, freight embargoes, and unusually severe weather.
(c) If the Contractor's failure to perform is caused by the default of a subcontractor, and if such default arises out of causes beyond the control of both the Contractor and subcontractor, and without the fault or negligence of either, the Contractor shall not be liable for any excess costs for failure to perform, unless the supplies or services to be furnished by the subcontractor were obtainable from other sources in sufficient time to permit the Contractor to perform the job order within the time specified.
(d) If the Government terminates the job order in whole or in part as provided in paragraph (a) of this clause—
(1) The Government may, upon such terms and in such manner as the Contracting Officer may deem appropriate, arrange for the completion of the work so terminated, at such plant or plants, including that of the Contractor, as may be designated by the Contracting Officer.
(i) The Contractor shall continue the performance of the job order to the extent not terminated under the provisions of this clause.
(ii) If the work is to be completed at the plant, the Government may use all tools, machinery, facilities, and equipment of the Contractor determined by the Contracting Office to be necessary for that purpose.
(iii) If the cost to the Government of the work procured or completed (after adjusting such cost to exclude the effect of changes in the plans and specifications made subsequent to the date of termination) exceeds the price fixed for work under the job order (after adjusting such price on account of changes in the plans and specifications made before the date of termination), the Contractor, or the Contractor's surety, if any, shall be liable for such excess.
(2) The Government, in addition to any other rights provided in this clause, may require the Contractor to transfer title and delivery to the Government, in the manner and to the extent directed by the Contracting Officer, any completed supplies and such partially completed supplies and materials, parts, tools, dies, jigs, fixtures, plans, drawings, information and contract rights (hereinafter called “manufacturing materials”) as the Contractor has specifically produced or specifically acquired for the performance of the terminated part of the job order.
(i) The Contractor shall, upon direction of the Contracting Officer, protect and preserve property in possession of the Contractor in which the Government has an interest.
(ii) The Government shall pay to the Contractor the job order price for completed items of work delivered to and accepted by the Government, and the amount agreed upon by the Contractor and the Contracting Officer for manufacturing materials delivered to and accepted by the Government, and for the protection and preservation of property. Failure to agree shall be a dispute concerning a question of fact within the meaning of the Disputes clause.
(e) If, after notice of termination of the job order, it is determined that the Contractor was not in default, or that the default was excusable, the rights and obligations of the parties shall be the same as if the notice of termination had been issued for the convenience of the Government.
(f) If the Contractor fails to complete the performance of a job order within the time specified, or any extension, the actual damage to the Government for the delay will be difficult or impossible to determine.
(1) In lieu of actual damage, the Contractor shall pay to the Government as fixed, agreed, and liquidated damages for each calendar day of delay the amount, if any, set forth in the job order (prorated to the nearest hour for fractional days).
(2) If the Government terminates the job order, the Contractor shall be liable, in addition to the excess costs provided in paragraph (d) of this clause, for liquidated damages accruing until such time as the Government may reasonably obtain completion of the work.
(3) The Contractor shall not be charged with liquidated damages when the delay arises out of causes beyond the control and without the fault or negligence of the Contractor. Subject to the provisions of the Disputes clause of the Master Agreement, the Contracting Officer shall ascertain the facts and the extent of the delay and shall extend the time for performance when in the judgment of the Contracting Officer, the findings of fact justify an extension.
(g) The rights and remedies of the Government provided in this clause shall not be exclusive and are in addition to any other rights and remedies provided by law under this agreement.
(End of clause)
As prescribed in 217.7104(a), use the following clause:
PERFORMANCE (JUL 2009)
(a) Upon the award of a job order, the Contractor shall promptly start the work specified and shall diligently prosecute the work to completion. The Contractor shall not start work until the job order has been awarded except in the case of emergency work ordered by the Contracting Officer under the Job Orders and Compensation clause of the Master Agreement.
(b) The Government shall deliver the vessel described in the job order at the time and location specified in the job order. Upon completion of the work, the Government shall accept delivery of the vessel at the time and location specified in the job order.
(c) The Contractor shall, without charge and without specific requirement in a job order—
(1) Make available at the plant to personnel of the vessel while in dry dock or on a marine railway, sanitary lavatory and similar facilities acceptable to the Contracting Officer;
(2) Supply and maintain suitable brows and gangways from the pier, dry dock, or marine railway to the vessel;
(3) Treat salvage, scrap or other ship's material of the Government resulting from performance of the work as items of Government-furnished property, in accordance with the Government Property clause;
(4) Perform, or pay the cost of, any repair, reconditioning or replacement made necessary as the result of the use by the Contractor of any of the vessel's machinery, equipment or fittings, including, but not limited to, winches, pumps, rigging, or pipe lines; and
(5) Furnish suitable offices, office equipment and telephones at or near the site of the work for the Government's use.
(d) The job order will state whether dock and sea trials are required to determine whether or not the Contractor has satisfactorily performed the work.
(1) If dock and sea trials are required, the vessel shall be under the control of the vessel's commander and crew.
(2) The Contractor shall not conduct dock and sea trials not specified in the job order without advance approval of the Contracting Officer. Dock and sea trials not specified in the job order shall be at the Contractor's expense and risk.
(3) The Contractor shall provide and install all fittings and appliances necessary for dock and sea trials. The Contractor shall be responsible for care, installation, and removal of instruments and apparatus furnished by the Government for use in the trials.
(End of clause)
252.217-7011 Access to Vessel.
As prescribed at 217.7104(a), use the following clause:
ACCESS TO VESSEL (DEC 1991)
(a) Upon the request of the Contracting Officer, the Contractor shall grant admission to the Contractor's facilities and access to vessel, on a non-interference basis, as necessary to perform their respective responsibilities, to a reasonable number of:
(1) Government and other Government contractor employees (in addition to those Government employees attached to the vessel); and
(2) Representatives of offerors on other contemplated Government work.
(b) All personnel granted access shall comply with Contractor rules governing personnel at its shipyard.
(End of clause)
252.217-7012 Liability and Insurance.
As prescribed in 217.7104(a), use the following clause:
LIABILITY AND INSURANCE (AUG 2003)
(a) The Contractor shall exercise its best efforts to prevent accidents, injury, or damage to all employees, persons, and property, in and about the work, and to the vessel or part of the vessel upon which work is done.
(b) Loss or damage to the vessel, materials, or equipment.
(1) Unless otherwise directed or approved in writing by the Contracting Officer, the Contractor shall not carry insurance against any form of loss or damage to the vessel(s) or to the materials or equipment to which the Government has title or which have been furnished by the Government for installation by the Contractor. The Government assumes the risks of loss of and damage to that property.
(2) The Government does not assume any risk with respect to loss or damage compensated for by insurance or otherwise or resulting from risks with respect to which the Contractor has failed to maintain insurance, if available, as required or approved by the Contracting Officer.
(3) The Government does not assume risk of and will not pay for any costs of the following:
(i) Inspection, repair, replacement, or renewal of any defects in the vessel(s) or material and equipment due to—
(A) Defective workmanship performed by the Contractor or its subcontractors;
(B) Defective materials or equipment furnished by the Contractor or its subcontracts; or
(C) Workmanship, materials, or equipment which do not conform to the requirements of the contract, whether or not the defect is latent or whether or not the nonconformance is the result of negligence.
(ii) Loss, damage, liability, or expense caused by, resulting from, or incurred as a consequence of any delay or disruption, willful misconduct or lack of good faith by the Contractor or any of its representatives that have supervision or direction of—
(A) All or substantially all of the Contractor's business; or
(B) All or substantially all of the Contractor's operation at any one plant.
(4) As to any risk that is assumed by the Government, the Government shall be subrogated to any claim, demand or cause of action against third parties that exists in favor of the Contractor. If required by the Contracting Officer, the Contractor shall execute a formal assignment or transfer of the claim, demand, or cause of action.
(5) No party other than the Contractor shall have any right to proceed directly against the Government or join the Government as a co-defendant in any action.
(6) Notwithstanding the foregoing, the Contractor shall bear the first $50,000 of loss or damage from each occurrence or incident, the risk of which the Government would have assumed under the provisions of this paragraph (b).
(c) Indemnification. The Contractor indemnifies the Government and the vessel and its owners against all claims, demands, or causes of action to which the Government, the vessel or its owner(s) might be subject as a result of damage or injury (including death) to the property or person of anyone other than the Government or its employees, or the vessel or its owner, arising in whole or in part from the negligence or other wrongful act of the Contractor or its agents or employees, or any subcontractor, or its agents or employees.
(1) The Contractor's obligation to indemnify under this paragraph shall not exceed the sum of $300,000 as a consequence of any single occurrence with respect to any one vessel.
(2) The indemnity includes, without limitation, suits, actions, claims, costs, or demands of any kind, resulting from death, personal injury, or property damage occurring during the period of performance of work on the vessel or within 90 days after redelivery of the vessel. For any claim, etc., made after 90 days, the rights of the parties shall be as determined by other provisions of this agreement and by law. The indemnity does apply to death occurring after 90 days where the injury was received during the period covered by the indemnity.
(d) Insurance.
(1) The Contractor shall, at its own expense, obtain and maintain the following insurance—
(i) Casualty, accident, and liability insurance, as approved by the Contracting Officer, insuring the performance of its obligations under paragraph (c) of this clause.
(ii) Workers Compensation Insurance (or its equivalent) covering the employees engaged on the work.
(2) The Contractor shall ensure that all subcontractors engaged on the work obtain and maintain the insurance required in paragraph (d)(1) of this clause.
(3) Upon request of the Contracting Officer, the Contractor shall provide evidence of the insurance required by paragraph (d) of this clause.
(e) The Contractor shall not make any allowance in the job order price for the inclusion of any premium expense or charge for any reserve made on account of self-insurance for coverage against any risk assumed by the Government under this clause.
(f) The Contractor shall give the Contracting Officer written notice as soon as practicable after the occurrence of a loss or damage for which the Government has assumed the risk.
(1) The notice shall contain full details of the loss or damage.
(2) If a claim or suit is later filed against the Contractor as a result of the event, the Contractor shall immediately deliver to the Government every demand, notice, summons, or other process received by the Contractor or its employees or representatives.
(3) The Contractor shall cooperate with the Government and, upon request, shall assist in effecting settlements, securing and giving evidence, obtaining the attendance of witnesses, and in the conduct of suits. The Government shall reimburse the Contractor for expenses incurred in this effort, other than the cost of maintaining the Contractor's usual organization.
(4) The Contractor shall not, except at its own expense, voluntarily make any payment, assume any obligation, or incur any expense other than what would be imperative for the protection of the vessel(s) at the time of the event.
(g) In the event or loss of or damage to any vessel(s), material, or equipment which may result in a claim against the Government under the insurance provisions of this contract, the Contractor shall promptly notify the Contracting Officer of the loss or damage. The Contracting Officer may, without prejudice to any other right of the Government, either—
(1) Order the Contractor to proceed with replacement or repair, in which event the Contractor shall effect the replacement or repair;
(i) The Contractor shall submit to the Contracting Officer a request for reimbursement of the cost of the replacement or repair together with whatever supporting documentation the Contracting Officer may reasonably require, and shall identify the request as being submitted under the Insurance clause of the agreement.
(ii) If the Government determines that the risk of the loss or damage is within the scope of the risks assumed by the Government under this clause, the Government will reimburse the Contractor for the reasonable, allowable cost of the replacement or repair, plus a reasonable profit (if the work or replacement or repair was performed by the Contractor) less the deductible amount specified in paragraph (b) of this clause.
(iii) Payments by the Government to the Contractor under this clause are outside the scope of and shall not affect the pricing structure of the contract, and are additional to the compensation otherwise payable to the Contractor under this contract; or
(2) In the event the Contracting Officer decides that the loss or damage shall not be replaced or repaired, the Contracting Officer shall—
(i) Modify the contract appropriately, consistent with the reduced requirements reflected by the unreplaced or unrepaired loss or damage; or
(ii) Terminate the repair of any part or all of the vessel(s) under the Termination for Convenience of the Government clause of this agreement.
(End of clause)
As prescribed in 217.7104(a), use the following clause:
GUARANTEES (DEC 1991)
(a) In the event any work performed or materials furnished by the contractor under the Master Agreement prove defective or deficient within 90 days from the date of redelivery of the vessel(s), the Contractor, as directed by the Contracting Officer and at its own expense, shall correct and repair the deficiency to the satisfaction of the Contracting Officer.
(b) If the Contractor or any subcontractor has a guarantee for work performed or materials furnished that exceeds the 90 day period, the Government shall be entitled to rely upon the longer guarantee until its expiration.
(c) With respect to any individual work item identified as incomplete at the time of redelivery of the vessel(s), the guarantee period shall run from the date the item is completed.
(d) If practicable, the Government shall give the Contractor an opportunity to correct the deficiency.
(1) If the Contracting Officer determines it is not practicable or is otherwise not advisable to return the vessel(s) to the Contractor, or the Contractor fails to proceed with the repairs promptly, the Contracting Officer may direct that the repairs be performed elsewhere, at the Contractor's expense.
(2) If correction and repairs are performed by other than the Contractor, the Contracting Officer may discharge the Contractor's liability by making an equitable deduction in the price of the job order.
(e) The Contractor's liability shall extend for an additional 90 day guarantee period on those defects or deficiencies that the Contractor corrected.
(f) At the option of the Contracting Officer, defects and deficiencies may be left uncorrected. In that event, the Contractor and Contracting Officer shall negotiate an equitable reduction in the job price. Failure to agree upon an equitable reduction shall constitute a dispute under the Disputes clause of this agreement.
(End of clause)
252.217-7014 Discharge of Liens.
As prescribed in 217.7104(a), use the following clause:
DISCHARGE OF LIENS (DEC 1991)
(a) The Contractor shall immediately discharge, or cause to be discharged, any lien or right in rem of any kind, other than in favor of the Government, that exists or arises in connection with work done or material furnished under any job order under this agreement.
(b) If any lien or right in rem is not immediately discharged, the Government, at the expense of the Contractor, may discharge, or cause to be discharged, the lien or right.
(End of clause)
252.217-7015 Safety and Health.
As prescribed in 217.7104(a), use the following clause:
SAFETY AND HEALTH (DEC 1991)
Nothing contained in the Master Agreement or any job order shall relieve the Contractor of any obligations it may have to comply with—
(a) The Occupational Safety and Health Act of 1970 (29 U.S.C. 651, et seq.);
(b) The Safety and Health Regulations for Ship Repairing (29 CFR 1915); or
(c) Any other applicable Federal, State, and local laws, codes, ordinances, and regulations.
(End of clause)
252.217-7016 Plant Protection.
As prescribed in 217.7104(a), use the following clause:
PLANT PROTECTION (DEC 1991)
(a) The Contractor shall provide, for the plant and work in process, reasonable safeguards against all hazards, including unauthorized entry, malicious mischief, theft, vandalism, and fire.
(b) The Contractor shall also provide whatever additional safeguards are necessary to protect the plant and work in process from espionage, sabotage, and enemy action.
(1) The Government shall reimburse the Contractor for that portion of the costs of the additional safeguards that is allocable to the contract in the same manner as if the Contracting Officer had issued a change order for the additional safeguards.
(2) The costs reimbursed shall not include any overhead allowance, unless the overhead is incident to the construction or installation of necessary security devices or equipment.
(c) Upon payment by the Government of the cost of any device or equipment required or approved under paragraph (b) of this clause, title shall vest in the Government.
(1) The Contractor shall comply with the instructions of the Contracting Officer concerning its identification and disposition.
(2) No such device or equipment shall become a fixture as a result of its being affixed to realty not owned by the Government.
(End of clause)
252.217-7026 Identification of Sources of Supply.
As prescribed in 217.7303, use the following provision:
IDENTIFICATION OF SOURCES OF SUPPLY (NOV 1995)
(a) The Government is required under 10 U.S.C. 2384 to obtain certain information on the actual manufacturer or sources of supplies it acquires.
(b) The apparently successful Offeror agrees to complete and submit the following table before award:
TABLE | ||||||
National |
Commercial |
Source of Supply |
Actual | |||
Line |
Stock |
Item |
Company |
Address |
Part No. |
Mfg? |
Items |
Number |
(Y or N) |
||||
(1) |
(2) |
(3) |
(4) |
(4) |
(5) |
(6) |
______ |
________ |
__________ |
_________ |
_______ |
________ |
_______ |
(1) List each deliverable item of supply and item of technical data. | ||||||
(2) If there is no national stock number, list “none.” | ||||||
(3) Use “Y” if the item is a commercial item; otherwise use “N.” If “Y” is listed, the Offeror need not complete the remaining columns in the table. | ||||||
(4) For items of supply, list all sources. For technical data, list the source. | ||||||
(5) For items of supply, list each source's part number for the item. | ||||||
(6) Use “Y” if the source of supply is the actual manufacturer; “N” if it is not; and “U” if unknown. |
(End of provision)
252.217-7027 Contract Definitization.
As prescribed in 217.7406(b), use the following clause:
CONTRACT DEFINITIZATION (DEC 2012)
(a) A ________________ (insert specific type of contract action) is contemplated. The Contractor agrees to begin promptly negotiating with the Contracting Officer the terms of a definitive contract that will include (1) all clauses required by the Federal Acquisition Regulation (FAR) on the date of execution of the undefinitized contract action, (2) all clauses required by law on the date of execution of the definitive contract action, and (3) any other mutually agreeable clauses, terms, and conditions. The Contractor agrees to submit a _______________ (insert type of proposal; e.g., fixed-price
or cost-and-fee) proposal and certified cost or pricing data supporting its proposal.
(b) The schedule for definitizing this contract action is as follows (insert target date for definitization of the contract action and dates for submission of proposal, beginning of negotiations, and, if appropriate, submission of the make-or-buy and subcontracting
plans and certified cost or pricing data):
(c) If agreement on a definitive contract action to supersede this undefinitized contract action is not reached by the target date in paragraph (b) of this clause, or within any extension of it granted by the Contracting Officer, the Contracting Officer may, with the approval of the head of the contracting activity, determine a reasonable price or fee in accordance with Subpart 15.4 and Part 31 of the FAR, subject to Contractor appeal as provided in the Disputes clause. In any event, the Contractor shall proceed with completion of the contract, subject only to the Limitation of Government Liability clause.
(1) After the Contracting Officer’s determination of price or fee, the contract shall be governed by
(i) All clauses required by the FAR on the date of execution of this undefinitized contract action for either fixed-price or cost-reimbursement contracts, as determined by the Contracting Officer under this paragraph (c);
(ii) All clauses required by law as of the date of the Contracting Officer’s determination; and
(iii) Any other clauses, terms, and conditions mutually agreed upon.
(2) To the extent consistent with paragraph (c)(1) of this clause, all clauses, terms, and conditions included in this undefinitized contract action shall continue in effect, except those that by their nature apply only to an undefinitized contract action.
(d) The definitive contract resulting from this undefinitized contract action will include a negotiated _________________ (insert “cost/price ceiling” or “firm-fixed price”) in no event to exceed __________ (insert the not-to-exceed amount).
(End of clause)
252.217-7028 Over and Above Work.
As prescribed in 217.7702, use a clause substantially as follows:
OVER AND ABOVE WORK (DEC 1991)
(a) Definitions. As used in this clause—
(1) “Over and above work” means work discovered during the course of performing overhaul, maintenance, and repair efforts that is—
(i) Within the general scope of the contract;
(ii) Not covered by the line item(s) for the basic work under the contract; and
(iii) Necessary in order to satisfactorily complete the contract.
(2) “Work request” means a document prepared by the Contractor which describes over and above work being proposed.
(b) The Contractor and Administrative Contracting Officer shall mutually agree to procedures for Government administration and Contractor performance of over and above work requests. If the parties cannot agree upon the procedures, the Administrative Contracting Officer has the unilateral right to direct the over and above work procedures to be followed. These procedures shall, as a minimum, cover—
(1) The format, content, and submission of work requests by the Contractor. Work requests shall contain data on the type of discrepancy disclosed, the specific location of the discrepancy, and the estimated labor hours and material required to correct the discrepancy. Data shall be sufficient to satisfy contract requirements and obtain the authorization of the Contracting Officer to perform the proposed work;
(2) Government review, verification, and authorization of the work; and
(3) Proposal pricing, submission, negotiation, and definitization.
(c) Upon discovery of the need for over and above work, the Contractor shall prepare and furnish to the Government a work request in accordance with the agreed-to procedures.
(d) The Government shall—
(1) Promptly review the work request;
(2) Verify that the proposed work is required and not covered under the basic contract line item(s);
(3) Verify that the proposed corrective action is appropriate; and
(4) Authorize over and above work as necessary.
(e) The Contractor shall promptly submit to the Contracting Officer, a proposal for the over and above work. The Government and Contractor will then negotiate a settlement for the over and above work. Contract modifications will be executed to definitize all over and above work.
(f) Failure to agree on the price of over and above work shall be a dispute within the meaning of the Disputes clause of this contract.
(End of clause)
(Revised October 31, 2018)
252.219-7000 Advancing Small Business Growth.
As prescribed in 219.309(1), use the following provision:
ADVANCING SMALL BUSINESS GROWTH (SEP 2016)
(a) This provision implements 10 U.S.C. 2419.
(b) The Offeror acknowledges by submission of its offer that by acceptance of the contract resulting from this solicitation, the Offeror may exceed the applicable small business size standard of the North American Industry Classification System (NAICS) code assigned to the contract and would no longer qualify as a small business concern for that NAICS code. (Small business size standards matched to industry NAICS codes are published by the Small Business Administration and are available at http://www.sba.gov/content/table-small-business-size-standards.) The Offeror is therefore encouraged to develop the capabilities and characteristics typically desired in contractors that are competitive as other-than-small contractors in this industry.
(c) For procurement technical assistance, the Offeror may contact the nearest Procurement Technical Assistance Center (PTAC). PTAC locations are available at
http://www.dla.mil/HQ/SmallBusiness/PTAC.aspx.
(End of provision)
252.219-7003 Small Business Subcontracting Plan (DoD Contracts).
Basic. As prescribed in 219.708(b)(1)(A) and (b)(1)(A)(1), use the following clause:
SMALL BUSINESS SUBCONTRACTING PLAN (DOD CONTRACTS)—BASIC
(APR 2018)
This clause supplements the Federal Acquisition Regulation 52.219-9, Small Business Subcontracting Plan, clause of this contract.
(a) Definitions. “Summary Subcontract Report (SSR) Coordinator,” as used in this clause, means the individual at the department or agency level who is registered in the Electronic Subcontracting Reporting System (eSRS) and is responsible for acknowledging receipt or rejecting SSRs in eSRS for the department or agency.
(b) Subcontracts awarded to workshops approved by the Committee for Purchase from People Who are Blind or Severely Disabled (41 U.S.C. 8502-8504), may be counted toward the Contractor’s small business subcontracting goal.
(c) A mentor firm, under the Pilot Mentor-Protege Program established under section 831 of Public Law 101-510, as amended, may count toward its small disadvantaged business goal, subcontracts awarded to—
(1) Protege firms which are qualified organizations employing the severely disabled; and
(2) Former protege firms that meet the criteria in section 831(g)(4) of Public Law 101-510.
(d) The master plan is approved by the Contractor's cognizant contract administration activity.
(e) In those subcontracting plans which specifically identify small businesses, the Contractor shall notify the Administrative Contracting Officer of any substitutions of firms that are not small business firms, for the small business firms specifically identified in the subcontracting plan. Notifications shall be in writing and shall occur within a reasonable period of time after award of the subcontract. Contractor-specified formats shall be acceptable.
(f)(1) For DoD, the Contractor shall submit reports in eSRS as follows:
(i) The Individual Subcontract Report (ISR) shall be submitted to the contracting officer at the procuring contracting office, even when contract administration has been delegated to the Defense Contract Management Agency.
(ii) An SSR for other than a commercial subcontracting plan, or construction and related maintenance repair contracts, shall be submitted in eSRS to the department or agency within DoD that administers the majority of the Contractor’s individual subcontracting plans. An example would be Defense Finance and Accounting Service or Missile Defense Agency.
(2) For DoD, the authority to acknowledge receipt or reject reports in eSRS is as follows:
(i) The authority to acknowledge receipt or reject the ISR resides with the contracting officer who receives it, as described in paragraph (f)(1)(i) of this clause.
(ii) Except as provided in (f)(2)(iii), the authority to acknowledge receipt or reject SSRs in eSRS resides with the SSR Coordinator at the department or agency that administers the majority of the Contractor’s individual subcontracting plans.
(iii) The authority to acknowledge receipt or reject SSRs for construction and related maintenance and repair contracts resides with the SSR Coordinator for each department or agency.
(g) Include the clause at 252.219-7004, Small Business Subcontracting Plan (Test Program), in subcontracts with subcontractors that participate in the Test Program described in DFARS 219.702-70, if the subcontract is expected to exceed $700,000 ($1.5 million for construction of any public facility) and to have further subcontracting opportunities.
(End of clause)
Alternate I. As prescribed in 219.708(b)(1)(A) and (b)(1)(A)(2), use the following clause, which uses a different paragraph (f) than the basic clause.
SMALL BUSINESS SUBCONTRACTING PLAN (DOD CONTRACTS)—
ALTERNATE I (APR 2018)
This clause supplements the Federal Acquisition Regulation 52.219-9, Small Business Subcontracting Plan, clause of this contract.
(a) Definitions. “Summary Subcontract Report (SSR) Coordinator,” as used in this clause, means the individual at the department or agency level who is registered in the Electronic Subcontracting Reporting System (eSRS) and is responsible for acknowledging receipt or rejecting SSRs in eSRS for the department or agency.
(b) Subcontracts awarded to workshops approved by the Committee for Purchase from People Who are Blind or Severely Disabled (41 U.S.C. 8502-8504), may be counted toward the Contractor’s small business subcontracting goal.
(c) A mentor firm, under the Pilot Mentor-Protege Program established under section 831 of Public Law 101-510, as amended, may count toward its small disadvantaged business goal, subcontracts awarded to—
(1) Protege firms which are qualified organizations employing the severely disabled; and
(2) Former protege firms that meet the criteria in section 831(g)(4) of Public Law 101-510.
(d) The master plan is approved by the Contractor's cognizant contract administration activity.
(e) In those subcontracting plans which specifically identify small businesses, the Contractor shall notify the Administrative Contracting Officer of any substitutions of firms that are not small business firms, for the small business firms specifically identified in the subcontracting plan. Notifications shall be in writing and shall occur within a reasonable period of time after award of the subcontract. Contractor-specified formats shall be acceptable.
(f)(1) For DoD, the Contractor shall submit reports in eSRS as follows:
(i) The Standard Form 294, Subcontracting Report for Individual Contracts, shall be submitted in accordance with the instructions on that form.
(ii) An SSR for other than a commercial subcontracting plan, or construction and related maintenance repair contracts, shall be submitted in eSRS to the department or agency within DoD that administers the majority of the Contractor’s individual subcontracting plans. An example would be Defense Finance and Accounting Service or Missile Defense Agency.
(2) For DoD, the authority to acknowledge receipt or reject reports in eSRS is as follows:
(i) Except as provided in paragraph (f)(2)(ii) of this clause, the authority to acknowledge receipt or reject SSRs in eSRS resides with the SSR Coordinator at the department or agency that administers the majority of the Contractor’s individual subcontracting plans.
(ii) The authority to acknowledge receipt or reject SSRs for construction and related maintenance and repair contracts resides with the SSR Coordinator for each department or agency.
(g) Include the clause at 252.219-7004, Small Business Subcontracting Plan (Test Program), in subcontracts with subcontractors that participate in the Test Program described in DFARS 219.702-70, if the subcontract is expected to exceed $700,000 ($1.5 million for construction of any public facility) and to have further subcontracting opportunities.
(End of clause)
252.219-7004 Small Business Subcontracting Plan (Test Program).
As prescribed in 219.708(b)(1)(B), use the following clause:
SMALL BUSINESS SUBCONTRACTING PLAN (TEST PROGRAM) (APR 2018)
(a) Definitions. As used in this clause—
“Covered small business concern” means a small business concern, veteran-owned small business concern, service-disabled veteran-owned small business concern, HUBZone small business concern, women-owned small business concern, or small disadvantaged business concern, as these terms are defined in FAR 2.101.
“Electronic Subcontracting Reporting System (eSRS)” means the Governmentwide, electronic, web-based system for small business subcontracting program reporting. The eSRS is located at http://www.esrs.gov.
“Failure to make a good faith effort to comply with a comprehensive subcontracting plan” means a willful or intentional failure to perform in accordance with the requirements of the Contractor’s approved comprehensive subcontracting plan or willful or intentional action to frustrate the plan.
“Subcontract” means any agreement (other than one involving an employer-
employee relationship) entered into by a Federal Government prime Contractor or
subcontractor calling for supplies or services required for performance of the contract or subcontract.
(b) Test Program. The Contractor’s comprehensive small business subcontracting plan and its successors, which are authorized by and approved under the Test Program of 15 U.S.C. 637 note, as amended, shall be included in and made a part of this contract. Upon expulsion from the Test Program or expiration of the Test Program, the
Contractor shall negotiate an individual subcontracting plan for all future contracts
that meet the requirements of 15 U.S.C. 637(d).
(c) Eligibility requirements. To become and remain eligible to participate in the Test Program, a business concern is required to have furnished supplies or services (including construction) under at least three DoD contracts during the preceding fiscal year, having an aggregate value of at least $100 million.
(d) Reports.
(1) The Contractor shall report semiannually for the 6-month periods ending March 31 and September 30, the information in paragraphs (d)(1)(i) through (v) of this section within 30 days after the end of the reporting period. Submit the report at https://www.esrs.gov.
(i) A list of contracts covered under its comprehensive small business subcontracting plan, to include the Commercial and Government Entity (CAGE) code and unique entity identifier.
(ii) The amount of first-tier subcontract dollars awarded during the 6-month period covered by the report to covered small business concerns, with the information set forth separately by—
(A) North American Industrial Classification System (NAICS) code;
(B) Major defense acquisition program, as defined in 10 U.S.C. 2430(a);
(C) Contract number, if the contract is for maintenance, overhaul, repair, servicing, rehabilitation, salvage, modernization, or modification of supplies, systems, or equipment, and the total value of the contract, including options, exceeds $100 million; and
(D) Military department.
(iii) Total number of subcontracts active under the Test Program that would have otherwise required a subcontracting plan.
(iv) Costs incurred in negotiating, complying with, and reporting on its comprehensive subcontracting plan.
(v) Costs avoided through the use of a comprehensive subcontracting plan.
(2) The Contractor shall
(i) Ensure that subcontractors with subcontracting plans agree to submit an
Individual Subcontract Report (ISR) and/or Summary Subcontract Report (SSR) using
the Electronic Subcontracting Reporting System (eSRS).
(ii) Provide its contract number, its unique entity identifier, and the email
address of the Contractor’s official responsible for acknowledging or rejecting the ISR to
all first-tier subcontractors, who will be required to submit ISRs, so they can enter this information into the eSRS when submitting their reports.
(iii) Require that each subcontractor with a subcontracting plan provide the
prime contract number, its own unique entity identifier, and the email address of the
subcontractor’s official responsible for acknowledging or rejecting the ISRs to its
subcontractors with subcontracting plans who will be required to submit ISRs.
(iv) Acknowledge receipt or reject all ISRs submitted by its subcontractors using eSRS.
(3) The Contractor shall submit SSRs using eSRS at http://www.esrs.gov. The reports shall provide information on subcontract awards to small business concerns, veteran-owned small business concerns, service-disabled veteran-owned small business concerns, HUBZone small business concerns, small disadvantaged business concerns, and women-owned small business concerns. Purchases from a corporation, company, or subdivision that is an affiliate of the prime Contractor or subcontractor are not included in these reports. Subcontract award data reported by prime contractors and subcontractors shall be limited to awards made to their immediate next-tier subcontractors. Credit cannot be taken for awards made to lower-tier subcontractors unless the Contractor or subcontractor has been designated to receive a small business or small disadvantaged business credit from a member firm of the Alaska Native Corporations or an Indian tribe. Only subcontracts involving performance in the U.S. or its outlying areas should be included in these reports.
(i) This report may be submitted on a corporate, company, or subdivision
(e.g., plant or division operating as a separate profit center) basis, as negotiated in the comprehensive subcontracting plan with the Defense Contract Management Agency.
(ii) This report encompasses all subcontracting under prime contracts and
subcontracts with the Department of Defense, regardless of the dollar value of the subcontracts, and is based on the negotiated comprehensive subcontracting plan.
(iii) The report shall be submitted semi-annually for the six months ending
March 31 and the twelve months ending September 30. Reports are due 30 days after the close of each reporting period.
(iv) The authority to acknowledge receipt of or reject the SSR resides with
the Defense Contract Management Agency.
(e) Failure to comply. The failure of the Contractor or subcontractor to comply in
good faith with the clause of this contract entitled “Utilization of Small Business
Concerns,” or an approved plan required by this clause, shall be a material breach of the contract.
(f) Liquidated damages. The Contracting Officer designated to manage the comprehensive subcontracting plan will exercise the functions of the Contracting Officer, as identified in paragraphs (f)(1) through (4) of this clause, on behalf of all DoD departments and agencies that awarded contracts covered by the Contractor’s comprehensive subcontracting plan.
(1) To determine the need for liquidated damages, the Contracting Officer will conduct a compliance review during the fiscal year after the close of the fiscal year for which the plan is applicable. The Contracting Officer will compare the approved percentage or dollar goals to the total, actual subcontracting dollars covered by the plan.
(2) If the Contractor has failed to meet its approved subcontracting goal(s), the Contracting Officer will provide the Contractor written notice specifying the failure, advising of the potential for assessment of liquidated damages, and permitting the Contractor to demonstrate what good faith efforts have been made. The Contracting Officer may take the Contractor’s failure to respond to the notice within 15 working days (or longer period at the Contracting Officer’s discretion) as an admission that no valid explanation exists.
(3) If, after consideration of all relevant information, the Contracting Officer determines that the Contractor failed to make a good faith effort to comply with the comprehensive subcontracting plan, the Contracting Officer will issue a final decision to the Contractor to that effect and require the Contractor to pay liquidated damages to the Government in the amount identified in the comprehensive subcontracting plan.
(4) The Contractor shall have the right of appeal under the clause in this contract entitled “Disputes” from any final decision of the Contracting Officer.
(g) Subcontracts. The Contractor shall include in subcontracts that offer
subcontracting opportunities, are expected to exceed $700,000 ($1.5 million for
construction of any public facility), and are required to include the clause at 52.219-8,
Utilization of Small Business Concerns, the clauses at—
(1) FAR 52.219-9, Small Business Subcontracting Plan, and 252.219-7003, Small Business Subcontracting Plan (DoD Contracts)–Basic;
(2) FAR 52.219-9, Small Business Subcontracting Plan, with its Alternate III,
and 252.219-7003, Small Business Subcontracting Plan (DoD Contracts)–Alternate I,
to allow for submission of SF 294s in lieu of ISRs; or
(3) 252.219-7004, Small Business Subcontracting Plan (Test Program), in
subcontracts with subcontractors that participate in the Test Program described in DFARS 219.702-70.
(End of clause)
252.219-7009 Section 8(a) Direct Award.
As prescribed in 219.811-3(1), use the following clause:
SECTION 8(a) DIRECT AWARD (OCT 2018)
(a) This contract is issued as a direct award between the contracting office and the 8(a) Contractor pursuant to the Partnership Agreement between the Small Business Administration (SBA) and the Department of Defense. Accordingly, the SBA, even if not identified in Section A of this contract, is the prime contractor and retains responsibility for 8(a) certification, for 8(a) eligibility determinations and related issues, and for providing counseling and assistance to the 8(a) Contractor under the 8(a) Program. The cognizant SBA district office is:
________________________________________ |
________________________________________ |
________________________________________ |
________________________________________ |
[To be completed by the Contracting Officer |
(b) The contracting office is responsible for administering the contract and for taking any action on behalf of the Government under the terms and conditions of the contract; provided that the contracting office shall give advance notice to the SBA before it issues a final notice terminating performance, either in whole or in part, under the contract. The contracting office also shall coordinate with the SBA prior to processing any novation agreement. The contracting office may assign contract administration functions to a contract administration office.
(c) The 8(a) Contractor agrees that it will notify the Contracting Officer,
simultaneous with its notification to the SBA (as required by SBA’s 8(a) regulations at
13 CFR 124.515), when the owner or owners upon whom 8(a) eligibility is based plan to
relinquish ownership or control of the concern. Consistent with section 407 of Public
Law 100-656, transfer of ownership or control shall result in termination of the contract
for convenience, unless the SBA waives the requirement for termination prior to the
actual relinquishing of ownership and control.
(End of clause)
252.219-7010 Notification of Competition Limited to Eligible 8(a) Concerns—Partnership Agreement (Deviation 2019-O0003)
As prescribed in 219.811-3(2), use the following clause:
NOTIFICATION OF COMPETITION LIMITED TO ELIGIBLE 8(A) CONCERNS—PARTNERSHIP AGREEMENT (MAR 2016)
(a) Offers are solicited only from small business concerns expressly certified by the Small Business Administration (SBA) for participation in the SBA’s 8(a) Program and which meet the following criteria at the time of submission of offer:
(1) The Offeror is in conformance with the 8(a) support limitation set forth in its approved business plan.
(2) The Offeror is in conformance with the Business Activity Targets set forth in its approved business plan or any remedial action directed by the SBA.
(3) If the competition is to be limited to 8(a) concerns within one or more specific SBA regions or districts, then the offeror’s approved business plan is on the file and serviced by ____________________________. [Contracting Officer completes by inserting the appropriate SBA District and/or Regional Office(s) as identified by the SBA.]
(b) By submission of its offer, the Offeror represents that it meets all of the criteria set forth in paragraph (a) of this clause.
(c) Any award resulting from this solicitation will be made directly by the Contracting Officer to the successful 8(a) offeror selected through the evaluation criteria set forth in this solicitation.
(d)(1) Agreement. A small business concern submitting an offer in its own name shall furnish, in performing the contract, only end items manufactured or produced by small business concerns in the United States or its outlying areas, unless—
(i) The SBA has determined that there are no small business manufacturers or processors in the Federal market place in accordance with FAR 19.502-2(c);
(ii) The acquisition is processed under simplified acquisition procedures and the total amount of this contract does not exceed $25,000, in which case a small business concern may furnish the product of any domestic firm; or
(iii) The acquisition is a construction or service contract.
(2) The ___________________ [insert name of SBA's contractor] will notify the __________________ [insert name of contracting agency] Contracting Officer in writing immediately upon entering an agreement (either oral or written) to transfer all or part of its stock or other ownership interest to any other party.
(End of clause)
Class Deviation 2019-O0003—Limitations on Subcontracting for Small Business. Effective immediately this deviation remains in effect until it is incorporated into the FAR and DFARS, or otherwise rescinded
Use the following clause in lieu of the clause at FAR 52.219-18, Notification of Competition Limited to Eligible 8(a) Participants, in competitive solicitations and contracts when the acquisition is accomplished using the procedures of FAR 19.805 and processed in accordance with the Partnership Agreement between the Small Business Administration and DoD:
Notification of Competition Limited to Eligible 8(a) Concerns—Partnership Agreement (DEVIATION 2019-O0003)
(a) Offers are solicited only from small business concerns expressly certified by the Small Business Administration (SBA) for participation in the SBA’s 8(a) Program and which meet the following criteria at the time of submission of offer:
(1) The Offeror is in conformance with the 8(a) support limitation set forth in its approved business plan.
(2) The Offeror is in conformance with the Business Activity Targets set forth in its approved business plan or any remedial action directed by the SBA.
(3) If the competition is to be limited to 8(a) concerns within one or more specific SBA regions or districts, then the Offeror’s approved business plan is on file and serviced by ____________________________. [Contracting Officer completes by inserting the appropriate SBA District and/or Regional Office(s) as identified by the SBA.]
(b) By submission of its offer, the Offeror represents that it meets all of the criteria set forth in paragraph (a) of this clause.
(c) Any award resulting from this solicitation will be made directly by the Contracting Officer to the successful 8(a) offeror selected through the evaluation criteria set forth in this solicitation.
(d)(1) Agreement. Unless SBA has waived the requirements of paragraphs (d)(1)(i) through (iii) of this clause in accordance with 13 CFR 121.1204, a small business concern that provides an end item it did not manufacture, process, or produce, shall—
(i) Provide an end item that a small business has manufactured, processed, or produced in the United States or its outlying areas;
(ii) Be primarily engaged in the retail or wholesale trade and normally sell the type of item being supplied; and
(iii) Take ownership or possession of the item(s) with its personnel, equipment, or facilities in a manner consistent with industry practice; for example, providing storage, transportation, or delivery.
(2) Paragraph (d)(1) of this clause does not apply to construction or service contracts.
(3) The ____________ [insert name of SBA’s contractor] will notify the ____________ [insert name of contracting agency] Contracting Officer in writing immediately upon entering an agreement (either oral or written) to transfer all or part of its stock or other ownership interest to any other party.
(End of clause)
252.219-7011 Notification to Delay Performance.
As prescribed in 219.811-3(3), use the following clause:
NOTIFICATION TO DELAY PERFORMANCE (JUN 1998)
The Contractor shall not begin performance under this purchase order until 2 working days have passed from the date of its receipt. Unless the Contractor receives notification from the Small Business Administration that it is ineligible for this 8(a) award, or otherwise receives instructions from the Contracting Officer, performance under this purchase order may begin on the third working day following receipt of the purchase order. If a determination of ineligibility is issued within the 2-day period, the purchase order shall be considered canceled.
(End of clause)
252.219-7012 Competition for Religious-Related Services.
As prescribed in 219.270-3, use the following provision:
COMPETITION FOR RELIGIOUS-RELATED SERVICES (APR 2018)
(a) Definition. As used in this provision—
“Nonprofit organization” means any organization that is—
(1) Described in section 501(c) of the Internal Revenue Code of 1986; and
(2) Exempt from tax under section 501(a) of that Code.
(b) A nonprofit organization is not precluded from competing for a contract for religious-related services to be performed on a United States military installation notwithstanding that a nonprofit organization is not a small business concern as identified in FAR 19.000(a)(3).
(c) If the apparently successful offeror has not represented in its quotation or offer that it is a small business concern identified in FAR 19.000(a)(3), as appropriate to the solicitation, the Contracting Officer will verify that the offeror is registered in the System for Award Management database as a nonprofit organization.
(End of provision)